Masters Theses in the Pure and Applied Sciences

Masters Theses in the Pure and Applied Sciences
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
Total Pages: 314
Release: 2012-12-06
Genre: Science
ISBN: 1468449192

Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Recent Research in Control Engineering and Decision Making

Recent Research in Control Engineering and Decision Making
Author: Olga Dolinina
Publisher: Springer Nature
Total Pages: 669
Release: 2020-12-01
Genre: Technology & Engineering
ISBN: 3030652831

This book constitutes the full research papers and short monographs developed on the base of the refereed proceedings of the International Conference: Information and Communication Technologies for Research and Industry (ICIT 2020). The book brings accepted research papers which present mathematical modelling, innovative approaches and methods of solving problems in the sphere of control engineering and decision making for the various fields of studies: industry and research, energy efficiency and sustainability, ontology-based data simulation, theory and use of digital signal processing, cognitive systems, robotics, cybernetics, automation control theory, image and sound processing, image recognition, technologies, and computer vision. The book contains also several analytical reviews on using smart city technologies in Russia. The central audience of the book are researchers, industrial practitioners and students from the following areas: Adaptive Systems, Human–Robot Interaction, Artificial Intelligence, Smart City and Internet of Things, Information Systems, Mathematical Modelling, and the Information Sciences.

Optical sensor controlled multipass welding

Optical sensor controlled multipass welding
Author: R. Birrell
Publisher:
Total Pages: 0
Release: 1990
Genre:
ISBN:

Examined techniques for integrating a geometric model of MIG/MAG multipass fillet welding with a commercial optical sensor and welding robot.

Robotic Welding

Robotic Welding
Author: John A. Piotrowski
Publisher:
Total Pages: 280
Release: 1987
Genre: Technology & Engineering
ISBN:

Annual Report

Annual Report
Author: University of Wisconsin--Madison. Engineering Experiment Station
Publisher:
Total Pages: 180
Release: 1982
Genre: Engineering
ISBN:

Robotics in Practice

Robotics in Practice
Author: Joseph F. Engelberger
Publisher: Springer Science & Business Media
Total Pages: 383
Release: 2012-12-06
Genre: Technology & Engineering
ISBN: 1468471201

THE REAL THING by Isaac Asimov Back in 1939, when I was still a teenager, I began to write (and publish) a series of stories about robots which, for the first time in science fiction, were pictured as having been deliberately engineered to do their job safely. They were not intended to be creaky Gothic menaces, nor outlets for mawkish sentiment. They were simply well-designed machines. Beginning in 1942, I crystallized this notion in what I called 'The Three Laws of Robotics' and, in 1950, nine of my robot stories were collected into a book, I, Robot. I did not at that time seriously believe that I would live to see robots in action and robotics becoming a booming industry .... Yet here we are, better yet, I am alive to see it. But then, why shouldn't they be with us? Robots fulfil an important role in industry. They do simple and repetitive jobs more steadily, more reliably, and more uncomplainingly than a human being could - or should. Does a robot displace a human being? Certainly, but he does so at a job that, simply because a robot can do it, is beneath the dignity of a human being; a job that is no more than mindless drudgery. Better and more human jobs can be found for human beings - and should.

Advanced Automation Techniques In Adaptive Material Processing

Advanced Automation Techniques In Adaptive Material Processing
Author: Xiaoqi Chen
Publisher: World Scientific
Total Pages: 321
Release: 2002-09-06
Genre: Technology & Engineering
ISBN: 9814488933

This volume presents the editors' research as well as related recent findings on the applications of modern technologies in electrical and electronic engineering to the automation of some of the common manufacturing processes that have traditionally been handled within the mechanical and material engineering disciplines.In particular, the book includes the latest research results achieved through applied research and development projects over the past few years at the Gintic Institute of Manufacturing Technology, Singapore. It discusses advanced automation technologies such as in-process sensors, laser vision systems, and laser strobe vision, as well as advanced techniques such as sensory signal processing, adaptive process control, fuzzy logic, neural networks, expert systems, laser processing control, etc. The methodologies and techniques are applied to some important material processing applications, including grinding, polishing, machining, and welding. Practical automation solutions, which are complicated by part distortions, tool wear, process dynamics, and variants, are explained.The research efforts featured in the book are driven by industrial needs. They combine theoretical research with practical automation considerations. The techniques developed have been either implemented in the factory or prototyped in the laboratory.