Planning and Design of Roads, Airfields, and Heliports in the Theater of Operations-airfield and Heliport Design

Planning and Design of Roads, Airfields, and Heliports in the Theater of Operations-airfield and Heliport Design
Author: U. S. Government Department of the Army
Publisher: Createspace Independent Publishing Platform
Total Pages: 546
Release: 2013-01-17
Genre:
ISBN: 9781481972031

Field Manual (FM) 5-430 is intended for use as a training guide and reference text for engineer personnel responsible for planning, designing, and constructing roads, airfields, and heliports in the theater of operations (TO). FM 5-430 is divided into two separate volumes to make it more user-friendly. FM 5-430-00-1/AFJPAM 32-8013, vol. 1, Road Design, encompasses Chapters 1 through 9 and Appendices A through H. FM 5-430-00-1/AFJPAM 32-8013, Vol. 1 is a stand-alone volume for the design of TO roads. This volume also serves as a detailed description of information common to both roads and airfields, such as site selection, survey and earthwork, clearing and grubbing, base and subbase courses, and drainage.

Manuals Combined: U.S. Marine Corps Basic Reconnaissance Course (BRC) References

Manuals Combined: U.S. Marine Corps Basic Reconnaissance Course (BRC) References
Author:
Publisher: Jeffrey Frank Jones
Total Pages: 5351
Release:
Genre:
ISBN:

Over 5,300 total pages .... MARINE RECON Reconnaissance units are the commander’s eyes and ears on the battlefield. They are task organized as a highly trained six man team capable of conducting specific missions behind enemy lines. Employed as part of the Marine Air- Ground Task Force, reconnaissance teams provide timely information to the supported commander to shape and influence the battlefield. The varying types of missions a Reconnaissance team conduct depends on how deep in the battle space they are operating. Division Reconnaissance units support the close and distant battlespace, while Force Reconnaissance units conduct deep reconnaissance in support of a landing force. Common missions include, but are not limited to: Plan, coordinate, and conduct amphibious-ground reconnaissance and surveillance to observe, identify, and report enemy activity, and collect other information of military significance. Conduct specialized surveying to include: underwater reconnaissance and/or demolitions, beach permeability and topography, routes, bridges, structures, urban/rural areas, helicopter landing zones (LZ), parachute drop zones (DZ), aircraft forward operating sites, and mechanized reconnaissance missions. When properly task organized with other forces, equipment or personnel, assist in specialized engineer, radio, and other special reconnaissance missions. Infiltrate mission areas by necessary means to include: surface, subsurface and airborne operations. Conduct Initial Terminal Guidance (ITG) for helicopters, landing craft, parachutists, air-delivery, and re-supply. Designate and engage selected targets with organic weapons and force fires to support battlespace shaping. This includes designation and terminal guidance of precision-guided munitions. Conduct post-strike reconnaissance to determine and report battle damage assessment on a specified target or area. Conduct limited scale raids and ambushes. Just a SAMPLE of the included publications: BASIC RECONNAISSANCE COURSE PREPARATION GUIDE RECONNAISSANCE (RECON) TRAINING AND READINESS (T&R) MANUAL RECONNAISSANCE REPORTS GUIDE GROUND RECONNAISSANCE OPERATIONS GROUND COMBAT OPERATIONS Supporting Arms Observer, Spotter and Controller DEEP AIR SUPPORT SCOUTING AND PATROLLING Civil Affairs Tactics, Techniques, and Procedures MAGTF Intelligence Production and Analysis Counterintelligence Close Air Support Military Operations on Urbanized Terrain (MOUT) Convoy Operations Handbook TRAINING SUPPORT PACKAGE FOR: CONVOY SURVIVABILITY Convoy Operations Battle Book Tactics, Techniques, and Procedures for Training, Planning and Executing Convoy Operations Urban Attacks

Contingency Airfield and Road Construction Using Geosynthetic Fiber Stabilization of Sands

Contingency Airfield and Road Construction Using Geosynthetic Fiber Stabilization of Sands
Author: Steve L. Webster
Publisher:
Total Pages: 74
Release: 1997
Genre: Emergency airstrips
ISBN:

This report describes laboratory and field tests conducted using a new fiber stabilization technique for sands. Laboratory unconfined compression tests using 2-in. long monofilament polypropylene fibers to stabilize a poorly graded (SP) sand showed an optimum fiber content of 1 percent (by weight). Field test sections were constructed and traffic tested using simulated C-130 aircraft traffic (30,000-lb tire load at 100-psi tire pressure) and military truck traffic (5-ton military cargo truck loaded to a gross weight of 41,600 lb). Test results showed that sand fiber stabilization over a sand subgrade supported over 1,000 passes of a C-130 tire load with less than 2 in. of rutting. The top 4 in. of the sand fiber layer was lightly stabilized with Road Oyl to provide a wearing surface. Based on limited truck traffic tests, an 8-in.-thick sand-fiber layer, surfaced with a spray application of Road Oyl, would support substantial amounts of military truck traffic.

The Engineer

The Engineer
Author:
Publisher:
Total Pages: 72
Release: 1994
Genre: Military engineering
ISBN:

Airplane Performance on Grass Airfields

Airplane Performance on Grass Airfields
Author: Jaroslaw A. Pytka
Publisher: CRC Press
Total Pages: 135
Release: 2023-03-14
Genre: Technology & Engineering
ISBN: 1000877264

Airplane Performance on Grass Airfields presents an experiment-based approach to analysis and flight testing of airfield performance on grass runways. It discusses improvements for operational efficiency and safety of these airfields. The book analyzes the interaction between the landing gear wheels and the surface of a grass runways during both takeoff and landing. Considering the ground performance of an aircraft on a grass runway, the book covers test methods and devices for measuring performance and introduces an information system for the surface condition of grass airfields: GARFIELD. The system is based on a tire-grass interaction model and uses digital soil maps, as well as current meteorological data obtained from a weather server. The book is intended for researchers and practicing engineers in the fields of aviation and aircraft safety and performance.

Concrete, Masonry and Brickwork

Concrete, Masonry and Brickwork
Author: United States. Dept. of the Army
Publisher: Courier Corporation
Total Pages: 322
Release: 1999-01-01
Genre: House & Home
ISBN: 9780486409306

Newly revised and updated guide covers all aspects of concrete, masonry, brickwork. Step-by-step illustrated instructions for building patios, retaining walls, porches, brick barbecue, much more. 173 figures. 54 tables.

Materials Testing

Materials Testing
Author: Department of the Army
Publisher: Lulu.com
Total Pages: 375
Release: 2014-08-24
Genre: Technology & Engineering
ISBN: 1312426799

This manual provides the technical information necessary for military and other personnel to obtain samples and perform engineering tests and calculations on soils, bituminous paving mixtures, and concrete. These tests and calculations are required to achieve proper design with these materials and adequate control over their use in military and other construction. This manual covers soils, aggregates, bituminous cements, bituminous paving mixtures, Portland cement concrete, and stabilized soil including stabilizing agents such as bitumens, cements, lime, fly ash, and chemical modifiers. The manual gives detailed instructions for taking adequate representative test samples and step-by-step procedures for making physical properties tests and for recording, calculating, and evaluating the test results. The manual describes the tools and equipment for performing these tests and contains general instructions for the care, calibration, and use of test equipment.

Terotechnology XII

Terotechnology XII
Author: Norbert Radek
Publisher: Materials Research Forum LLC
Total Pages: 328
Release: 2022-09-05
Genre: Science
ISBN: 1644902044

Terotechnology is concerned with the installation, commissioning, maintenance, replacement, and removal of plant machinery and equipment. It also includes operation and design aspects, and related subjects and practices. Keywords: Flow Control Valve, Boiling Heat Transfer, Laser Treated Heaters, Laser Micro Machining, Surface Laser Micropatterning, Adhesive Joints, WC-Co Coatings, Diamond-Like Carbon Coatings, TiO2 Coatings, Weathering of Paint Systems. Rolling Stock, Cellular Automata, High Strength Concrete, Concrete Composites, Thermal Sensations, Intelligent Buildings, Sulphuric Acid, Corrosion Resistance of Coatings on Steel, Evaluating the Technological Modernity of Machines, Computer Simulation Techniques, Production Management, TNT Storage, Powder Metallurgy, Graphene Oxide, Rail Head Operational Crack, Aluminum Castings, Non-Destructive Testing, Automotive Industry Case Studies, Quality Assessment, Bearing Shell Casting, Rail Vehicles, Fuels in Rail Transport, Fire Hazard, Mobility Assessment for Tracked Vehicles, Laser Welding, Helical Metal Expansion Joints, Steel Joints, Flash Butt Welded Rail Joints, Gas Face Seals, Design Parameters of Ball Bearing, Neural Network Structure, Prescriptive Maintenance Strategy, Unmanned Aerial Vehicles, Urban Traffic Noise, Textile Cleaning Processes.