Flashback Mechanisms in Lean Premixed Gas Turbine Combustion

Flashback Mechanisms in Lean Premixed Gas Turbine Combustion
Author: Ali Cemal Benim
Publisher: Academic Press
Total Pages: 134
Release: 2014-12-01
Genre: Technology & Engineering
ISBN: 0128008261

Blending fuels with hydrogen offers the potential to reduce NOx and CO2 emissions in gas turbines, but doing so introduces potential new problems such as flashback. Flashback can lead to thermal overload and destruction of hardware in the turbine engine, with potentially expensive consequences. The little research on flashback that is available is fragmented. Flashback Mechanisms in Lean Premixed Gas Turbine Combustion by Ali Cemal Benim will address not only the overall issue of the flashback phenomenon, but also the issue of fragmented and incomplete research. - Presents a coherent review of flame flashback (a classic problem in premixed combustion) and its connection with the growing trend of popularity of more-efficient hydrogen-blend fuels - Begins with a brief review of industrial gas turbine combustion technology - Covers current environmental and economic motivations for replacing natural gas with hydrogen-blend fuels

Unsteady Combustor Physics

Unsteady Combustor Physics
Author: Tim C. Lieuwen
Publisher: Cambridge University Press
Total Pages: 427
Release: 2012-08-27
Genre: Technology & Engineering
ISBN: 1139576836

Developing clean, sustainable energy systems is a pre-eminent issue of our time. Most projections indicate that combustion-based energy conversion systems will continue to be the predominant approach for the majority of our energy usage. Unsteady combustor issues present the key challenge associated with the development of clean, high-efficiency combustion systems such as those used for power generation, heating or propulsion applications. This comprehensive study is unique, treating the subject in a systematic manner. Although this book focuses on unsteady combusting flows, it places particular emphasis on the system dynamics that occur at the intersection of the combustion, fluid mechanics and acoustic disciplines. Individuals with a background in fluid mechanics and combustion will find this book to be an incomparable study that synthesises these fields into a coherent understanding of the intrinsically unsteady processes in combustors.

Swirl Flows

Swirl Flows
Author: Ashwani K. Gupta
Publisher: Routledge
Total Pages: 496
Release: 1984
Genre: Science
ISBN:

Stabilization and Dynamic of Premixed Swirling Flames

Stabilization and Dynamic of Premixed Swirling Flames
Author: Paul Palies
Publisher: Academic Press
Total Pages: 402
Release: 2020-07-03
Genre: Technology & Engineering
ISBN: 0128199970

Stabilization and Dynamic of Premixed Swirling Flames: Prevaporized, Stratified, Partially, and Fully Premixed Regimes focuses on swirling flames in various premixed modes (stratified, partially, fully, prevaporized) for the combustor, and development and design of current and future swirl-stabilized combustion systems. This includes predicting capabilities, modeling of turbulent combustion, liquid fuel modeling, and a complete overview of stabilization of these flames in aeroengines. The book also discusses the effects of the operating envelope on upstream fresh gases and the subsequent impact of flame speed, combustion, and mixing, the theoretical framework for flame stabilization, and fully lean premixed injector design. Specific attention is paid to ground gas turbine applications, and a comprehensive review of stabilization mechanisms for premixed, partially-premixed, and stratified premixed flames. The last chapter covers the design of a fully premixed injector for future jet engine applications. - Features a complete view of the challenges at the intersection of swirling flame combustors, their requirements, and the physics of fluids at work - Addresses the challenges of turbulent combustion modeling with numerical simulations - Includes the presentation of the very latest numerical results and analyses of flashback, lean blowout, and combustion instabilities - Covers the design of a fully premixed injector for future jet engine applications

Gas Turbine Combustion

Gas Turbine Combustion
Author: Arthur H. Lefebvre
Publisher: CRC Press
Total Pages: 560
Release: 2010-04-26
Genre: Science
ISBN: 1420086057

Reflecting the developments in gas turbine combustion technology that have occurred in the last decade, Gas Turbine Combustion: Alternative Fuels and Emissions, Third Edition provides an up-to-date design manual and research reference on the design, manufacture, and operation of gas turbine combustors in applications ranging from aeronautical to po

Combustion Noise

Combustion Noise
Author: Anna Schwarz
Publisher: Springer Science & Business Media
Total Pages: 304
Release: 2009-06-17
Genre: Technology & Engineering
ISBN: 3642020380

November, 2008 Anna Schwarz, Johannes Janicka In the last thirty years noise emission has developed into a topic of increasing importance to society and economy. In ?elds such as air, road and rail traf?c, the control of noise emissions and development of associated noise-reduction techno- gies is a central requirement for social acceptance and economical competitiveness. The noise emission of combustion systems is a major part of the task of noise - duction. The following aspects motivate research: • Modern combustion chambers in technical combustion systems with low pol- tion exhausts are 5 - 8 dB louder compared to their predecessors. In the ope- tional state the noise pressure levels achieved can even be 10-15 dB louder. • High capacity torches in the chemical industry are usually placed at ground level because of the reasons of noise emissions instead of being placed at a height suitable for safety and security. • For airplanes the combustion emissions become a more and more important topic. The combustion instability and noise issues are one major obstacle for the introduction of green technologies as lean fuel combustion and premixed burners in aero-engines. The direct and indirect contribution of combustion noise to the overall core noise is still under discussion. However, it is clear that the core noise besides the fan tone will become an important noise source in future aero-engine designs. To further reduce the jet noise, geared ultra high bypass ratio fans are driven by only a few highly loaded turbine stages.

Combustion Instabilities in Gas Turbine Engines

Combustion Instabilities in Gas Turbine Engines
Author: Timothy C. Lieuwen
Publisher: AIAA (American Institute of Aeronautics & Astronautics)
Total Pages: 688
Release: 2005
Genre: Science
ISBN:

This book offers gas turbine users and manufacturers a valuable resource to help them sort through issues associated with combustion instabilities. In the last ten years, substantial efforts have been made in the industrial, governmental, and academic communities to understand the unique issues associated with combustion instabilities in low-emission gas turbines. The objective of this book is to compile these results into a series of chapters that address the various facets of the problem. The Case Studies section speaks to specific manufacturer and user experiences with combustion instabilities in the development stage and in fielded turbine engines. The book then goes on to examine The Fundamental Mechanisms, The Combustor Modeling, and Control Approaches.

Combustion, Flames and Explosions of Gases

Combustion, Flames and Explosions of Gases
Author: Bernard Lewis
Publisher: Academic Press
Total Pages: 754
Release: 2013-10-22
Genre: Science
ISBN: 1483258394

Combustion, Flames, and Explosions of Gases, Second Edition focuses on the processes, methodologies, and reactions involved in combustion phenomena. The publication first offers information on theoretical foundations, reaction between hydrogen and oxygen, and reaction between carbon monoxide and oxygen. Discussions focus on the fundamentals of reaction kinetics, elementary and complex reactions in gases, thermal reaction, and combined hydrogen-carbon monoxide-oxygen reaction. The text then elaborates on the reaction between hydrocarbons and oxygen and combustion waves in laminar flow. The manuscript tackles combustion waves in turbulent flow and air entrainment and burning of jets of fuel gases. Topics include effect of turbulence spectrum and turbulent wrinkling on combustion wave propagation; ignition of high-velocity streams by hot solid bodies; burners with primary air entrainment; and description of jet flames. The book then takes a look at detonation waves in gases; emission spectra, ionization, and electric-field effects in flames; and methods of flame photography and pressure recording. The publication is a valuable reference for readers interested in combustion phenomena.

Fundamentals of Combustion Processes

Fundamentals of Combustion Processes
Author: Sara McAllister
Publisher: Springer Science & Business Media
Total Pages: 315
Release: 2011-05-10
Genre: Science
ISBN: 1441979433

Fundamentals of Combustion Processes is designed as a textbook for an upper-division undergraduate and graduate level combustion course in mechanical engineering. The authors focus on the fundamental theory of combustion and provide a simplified discussion of basic combustion parameters and processes such as thermodynamics, chemical kinetics, ignition, diffusion and pre-mixed flames. The text includes exploration of applications, example exercises, suggested homework problems and videos of laboratory demonstrations

Combustion

Combustion
Author: J. Warnatz
Publisher: Springer Science & Business Media
Total Pages: 389
Release: 2006-09-23
Genre: Technology & Engineering
ISBN: 3540453636

This book provides a rigorous treatment of the coupling of chemical reactions and fluid flow. Combustion-specific topics of chemistry and fluid mechanics are considered and tools described for the simulation of combustion processes. This edition is completely restructured. Mathematical Formulae and derivations as well as the space-consuming reaction mechanisms have been replaced from the text to appendix. A new chapter discusses the impact of combustion processes on the atmosphere, the chapter on auto-ignition is extended to combustion in Otto- and Diesel-engines, and the chapters on heterogeneous combustion and on soot formation are heavily revised.