Ventilation for Control of the Work Environment

Ventilation for Control of the Work Environment
Author: William A. Burgess
Publisher: John Wiley & Sons
Total Pages: 575
Release: 2004-07-12
Genre: Science
ISBN: 0471667048

The second edition of Ventilation Control of the Work Environment incorporates changes in the field of industrial hygiene since the first edition was published in 1982. Integrating feedback from students and professionals, the new edition includes problems sets for each chapter and updated information on the modeling of exhaust ventilation systems, and thus assures the continuation of the book's role as the primary industry textbook. This revised text includes a large amount of material on HVAC systems, and has been updated to reflect the changes in the Ventilation Manual published by ACGIH. It uses both English and metric units, and each chapter concludes with a problem set.

Natural Ventilation for Infection Control in Health-care Settings

Natural Ventilation for Infection Control in Health-care Settings
Author: Y. Chartier
Publisher: World Health Organization
Total Pages: 132
Release: 2009
Genre: Medical
ISBN: 9241547855

This guideline defines ventilation and then natural ventilation. It explores the design requirements for natural ventilation in the context of infection control, describing the basic principles of design, construction, operation and maintenance for an effective natural ventilation system to control infection in health-care settings.

Toxicity and Safe Handling of Rubber Chemicals

Toxicity and Safe Handling of Rubber Chemicals
Author:
Publisher: iSmithers Rapra Publishing
Total Pages: 472
Release: 1999
Genre: Technology & Engineering
ISBN: 9781859571743

An essential reference book in every rubber factory, the BRMA code of practice has been fully upb306d by Rapra and the BRMA. The book provides a guide to the safe use of rubber chemicals. Several hundred chemicals are examined, including fillers, accelerators and retarders, vulcanising agents, antidegradants, peroxide, process oils and waxes, peptisers, plasticisers, blowing agents, bonding agents, latex auxiliaries, pigments, tackifiers and solvents. More than 30 new chemicals have been added since the last edition.

Prudent Practices in the Laboratory

Prudent Practices in the Laboratory
Author: National Research Council
Publisher: National Academies Press
Total Pages: 360
Release: 2011-03-25
Genre: Science
ISBN: 0309211581

Prudent Practices in the Laboratory-the book that has served for decades as the standard for chemical laboratory safety practice-now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.

Hazardous Chemicals Handbook

Hazardous Chemicals Handbook
Author: P A CARSON
Publisher: Elsevier
Total Pages: 389
Release: 2013-10-22
Genre: Technology & Engineering
ISBN: 008052379X

Summarizes core information for quick reference in the workplace, using tables and checklists wherever possible. Essential reading for safety officers, company managers, engineers, transport personnel, waste disposal personnel, environmental health officers, trainees on industrial training courses and engineering students. This book provides concise and clear explanation and look-up data on properties, exposure limits, flashpoints, monitoring techniques, personal protection and a host of other parameters and requirements relating to compliance with designated safe practice, control of hazards to people's health and limitation of impact on the environment. The book caters for the multitude of companies, officials and public and private employees who must comply with the regulations governing the use, storage, handling, transport and disposal of hazardous substances. Reference is made throughout to source documents and standards, and a Bibliography provides guidance to sources of wider ranging and more specialized information. Dr Phillip Carson is Safety Liaison and QA Manager at the Unilever Research Laboratory at Port Sunlight. He is a member of the Institution of Occupational Safety and Health, of the Institution of Chemical Engineers' Loss Prevention Panel and of the Chemical Industries Association's `Exposure Limits Task Force' and `Health Advisory Group'. Dr Clive Mumford is a Senior Lecturer in Chemical Engineering at the University of Aston and a consultant. He lectures on several courses of the Certificate and Diploma of the National Examining Board in Occupational Safety and Health. [Given 5 star rating] - Occupational Safety & Health, July 1994 - Loss Prevention Bulletin, April 1994 - Journal of Hazardous Materials, November 1994 - Process Safety & Environmental Prot., November 1994

Mine Ventilation

Mine Ventilation
Author: S. Bandopadhyay
Publisher: CRC Press
Total Pages: 537
Release: 2004-05-15
Genre: Technology & Engineering
ISBN: 1482283891

The purpose of the 10th US North American Mine Ventilation Symposium in Anchorage 2004 was to bring together practitioners involved in the planning and operation of underground ventilation systems, to provide a forum for debate and exchange of ideas, and to share information on the advances which have been made and consider problems

Dust Control Handbook for Industrial Minerals Mining and Processing

Dust Control Handbook for Industrial Minerals Mining and Processing
Author: Andrew B. Andrew B. Cecala
Publisher: CreateSpace
Total Pages: 312
Release: 2015-05-09
Genre:
ISBN: 9781511722186

Throughout the mining and processing of minerals, the mined ore undergoes a number of crushing, grinding, cleaning, drying, and product sizing operations as it is processed into a marketable commodity. These operations are highly mechanized, and both individually and collectively these processes can generate large amounts of dust. If control technologies are inadequate, hazardous levels of respirable dust may be liberated into the work environment, potentially exposing workers. Accordingly, federal regulations are in place to limit the respirable dust exposure of mine workers. Engineering controls are implemented in mining operations in an effort to reduce dust generation and limit worker exposure.

Handbook on the Toxicology of Metals

Handbook on the Toxicology of Metals
Author: Monica Nordberg
Publisher: Elsevier
Total Pages: 1024
Release: 2011-04-28
Genre: Science
ISBN: 0080546102

Handbook of the Toxicology of Metals is the standard reference work for physicians, toxicologists and engineers in the field of environmental and occupational health. This new edition is a comprehensive review of the effects on biological systems from metallic elements and their compounds. An entirely new structure and illustrations represent the vast array of advancements made since the last edition. Special emphasis has been placed on the toxic effects in humans with chapters on the diagnosis, treatment and prevention of metal poisoning. This up-to-date reference provides easy access to a broad range of basic toxicological data and also gives a general introduction to the toxicology of metallic compounds. * Covers up-to-date toxicological information on 31 metallic elements and their compounds, each in a separate chapter * New chapters on general chemistry, biological monitoring and biomarkers, essential metals, principles for prevention of the toxic effects of metals, and more