Examples for the Design of Structural Concrete with Strut-and-tie Models

Examples for the Design of Structural Concrete with Strut-and-tie Models
Author: American Concrete Institute. Convention
Publisher:
Total Pages: 264
Release: 2002
Genre: Architecture
ISBN:

"Prepared by members of ACI Subcommittee 445-1, Strut and Tie Models, for sessions at the Fall Convention in Phoenix, October 27 to November 1, 2002, and sponsored by Joint ACI-ASCE Committee 445, Shear and Torsion and ACI Committee 318-E, Shear and Torsion."

Structural Concrete

Structural Concrete
Author: Salah El-Metwally
Publisher: CRC Press
Total Pages: 261
Release: 2017-10-02
Genre: Technology & Engineering
ISBN: 1351651552

This book examines the application of strut-and-tie models (STM) for the design of structural concrete. It presents state-of-the-art information, from fundamental theories to practical engineering applications, and also provides innovative solutions for many design problems that are not otherwise achievable using the traditional methods.

Design Examples for Strut-and-tie Models

Design Examples for Strut-and-tie Models
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
Total Pages: 225
Release: 2011
Genre: Technology & Engineering
ISBN: 2883941017

fib Bulletin 61 is a continuation of fib Bulletin 16 (2002). Again the bulletin’s main objective is to demonstrate the application of the FIP Recommendations “Practical Design of Structural Concrete”, and especially to illustrate the use of strut-and-tie models to design discontinuity regions (D-regions) in concrete structures. Bulletin 61 presents 14 examples, most of which are existing structures built in recent years. Although some of the presented structures can be considered to be quite important and, in some instances, complex, the chosen examples are not intended to be exceptional. The main aim is to look at specific design aspects, by selecting D-regions of the presented structures that are designed and detailed according to the proposed design principles and specifications for the use of strut-and-tie models. Two papers at the end of the bulletin deal with the role of concrete tension fields in modelling with strut-and-tie models, and summarize the experiences gained by the Working Group in applying strut-and-tie models to the examples in the bulletin. It is hoped that fib Bulletin 61 will be of interest to engineers involved in the design of concrete structures, supporting the use of more consistent design and detailing tools such as strut-and-tie models.

Structural Concrete

Structural Concrete
Author: M. Nadim Hassoun
Publisher: John Wiley & Sons
Total Pages: 1034
Release: 2012-05
Genre: Technology & Engineering
ISBN: 1118131347

Emphasizing a conceptual understanding of concrete design and analysis, this revised and updated edition builds the student's understanding by presenting design methods in an easy to understand manner supported with the use of numerous examples and problems.

Examples of the Design of Reinforced Concrete Buildings to BS8110, Fourth Edition

Examples of the Design of Reinforced Concrete Buildings to BS8110, Fourth Edition
Author: C.E. Reynolds
Publisher: CRC Press
Total Pages: 326
Release: 1992-08-13
Genre: Architecture
ISBN: 0419170006

The latest edition of this well-known book makes available to structural design engineers a wealth of practical advice on effective design of concrete structures. It covers the complete range of concrete elements and includes numerous data sheets, charts and examples to help the designer. It is fully updated in line with the relevant British Standards and Codes of Practice.

Practical design of structural concrete

Practical design of structural concrete
Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
Total Pages: 114
Release: 1999-09-01
Genre: Technology & Engineering
ISBN: 1874266484

Prefabrication for Affordable Housing

Prefabrication for Affordable Housing
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
Total Pages: 127
Release: 2011-01-01
Genre: Technology & Engineering
ISBN: 2883941009

The need for housing has increased significantly during the last decades all over the world. It is felt particularly in countries where the population growth rate is high and the economy is developing fast; but everywhere people are shifting from the countryside to towns, where housing in neighbourhoods often becomes critical. The need for affordable housing may concern high-rate urbanization, rural areas to be upgraded, workers’ settlements in remote regions, rebuilding dwellings destroyed by disasters such as earthquakes, floods or wars, and even holiday resorts and leisure dwellings. Large projects always face cost- and time-constraints. Local conditions may be variable with respect to the physical, social and economic environment. Thus, minimising cost and time of construction, while maximising quantity and quality of product, may lead to different solutions. The concept of “affordable”, meaning compatibility of demand and means, is well understood as such everywhere, although its practical application may be much different from place to place. Concrete is a material that lends itself well to affordable housing: it is durable, has good thermal inertia, can be used both as structural and finishing material, and is not sensitive to organic attack. It also has some disadvantages, such as higher cost in developing countries compared to developed countries, and also a potential lack of materials, mainly cement or admixtures. Prefabrication, with its adaptability and quality consciousness, may offer valid, speedy, cost efficient and sustainable solutions. fib Bulletin 60 offers an overview of housing systems as well as information on their features. It shows the main features of a number of construction systems, without entering into the details of the solutions. It aims to make possible a comprehensive comparison, which should help in learning, exchanging and developing ideas on how to better meet the housing needs everywhere, at sustainable cost. A document of this kind was not available before; it is therefore expected to be of great interest and a source of ideas for all those who have to confront similar problems.

Topology Optimization

Topology Optimization
Author: Martin Philip Bendsoe
Publisher: Springer Science & Business Media
Total Pages: 381
Release: 2013-04-17
Genre: Mathematics
ISBN: 3662050862

The topology optimization method solves the basic enginee- ring problem of distributing a limited amount of material in a design space. The first edition of this book has become the standard text on optimal design which is concerned with the optimization of structural topology, shape and material. This edition, has been substantially revised and updated to reflect progress made in modelling and computational procedures. It also encompasses a comprehensive and unified description of the state-of-the-art of the so-called material distribution method, based on the use of mathematical programming and finite elements. Applications treated include not only structures but also materials and MEMS.

Design Examples - Design Examples for the 1996 FIP Recommendations 'Practical Design of Structural Concrete''

Design Examples - Design Examples for the 1996 FIP Recommendations 'Practical Design of Structural Concrete''
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
Total Pages: 206
Release: 2002-01-01
Genre: Technology & Engineering
ISBN: 9782883940567

The 1996 FIP Recommendations Practical Design of Structural Concretewere finally published by SETO in September 1999. They had been developed based on the 1990 CEB-FIP Model Code. The main objective of this Bulletin is now to demonstrate by practical examples the application of these recommendations, and especially to illustrate the use of strut-and-tie models for designing discontinuity regions in concrete structures. These examples represent also a continuation of the 1990 FIP Handbook on Practical Design that had been based on the former (1984) version of the recommendations. Most of the examples are recently built existing structures. Although some of them may be considered as quite important, the chosen examples are by no means exceptional. The technical report does not deal with the discussion of aesthetic or general conceptual aspects. On the contrary, the main aim is to treat particular design aspects by selecting local regions of the chosen structures, that are then designed and detailed following the design principles and specifications proposed in the 1996 FIP Recommendations mentioned above. The document is believed to be of interest to all engaged in the design of structural concrete. It hopefully supports the use of more consistent design and detailing tools like strut-and-tie models.