A piloted simulation experiment was conducted to document the trajectory errors associated with use of an airplane's Flight Management System (FMS) in conjunction with a ground-based ATC automation system, Center-TRACON Automation System (CTAS) in the terminal area. Three different arrival procedures were compared: current-day (vectors from ATC), modified (current-day with minor updates), and data link with FMS lateral navigation. Six active airline pilots flew simulated arrivals in a fixed-base simulator. The FMS-datalink procedure resulted in the smallest time and path distance errors, indicating that use of this procedure could reduce the CTAS arrival-time prediction error by about half over the current-day procedure. Significant sources of error contributing to the arrival-time error were crosstrack errors and early speed reduction in the last 2-4 miles before the final approach fix. Pilot comments were all very positive, indicating the FMS-datalink procedure was easy to understand and use, and the increased head-down time and workload did not detract from the benefit. Issues that need to be resolved before this method of operation would be ready for commercial use include development of procedures acceptable to controllers, better speed conformance monitoring, and FMS database procedures to support the approach transitions.Oseguera-Lohr, Rosa M. and Williams, David H.Langley Research CenterFLIGHT MANAGEMENT SYSTEMS; AIR TRAFFIC CONTROL; AIRCRAFT APPROACH SPACING; AIRCRAFT GUIDANCE; APPROACH CONTROL; PILOT SUPPORT SYSTEMS; NAVIGATION AIDS; ARRIVALS; AIRCRAFT PILOTS; DATA LINKS; AIRLINE OPERATIONS; AIRFIELD SURFACE MOVEMENTS; PILOT PERFORMANCE; TRAJECTORIES; ERRORS