Evaluation of Studded Tires

Evaluation of Studded Tires
Author:
Publisher:
Total Pages: 84
Release: 1969
Genre: Transportation
ISBN:

The current state of knowledge with both studded tire performance and methods of assessing pavement wear is reported. An annotated bibliography is presented of all known research on this subject from the U.S. and European sources, a review and evaluation of the data and results of completed studies and recommendations for future research. The objectives of the study were confined to the following tests: (1) correlation of data on the frictional characteristics of studded tires on ice, packed snow, and on bare pavements, and (2) development of a method, or methods, of quantitative assessment of the difference in wearing and abrasive effects of studded versus unstudded tires on different types of surfaces. A stud-resistance coefficient for operation on ice was derived and all U.S. data are correlated with this parameter and ice temperature.

Studded Tires Versus Pavement Wear and Safety

Studded Tires Versus Pavement Wear and Safety
Author: National Research Council (U.S.). Highway Research Board
Publisher:
Total Pages: 76
Release: 1971
Genre: Pavements
ISBN:

Pavement wear and a substantial increase in maintenance costs due to the use of studded tires is the focus of this Record.

Evaluation of Pavement Friction Characteristics

Evaluation of Pavement Friction Characteristics
Author: John Jewett Henry
Publisher: Transportation Research Board
Total Pages: 76
Release: 2000
Genre: Technology & Engineering
ISBN: 9780309068741

This synthesis report will be of interest to pavement design, construction, management, and research engineers, highway safety officials, and others concerned with pavement friction characteristics. It describes the current state of the practice and discusses the methods used for evaluating wet pavement friction characteristics of new and restored pavements. This synthesis reviews models used for measuring and evaluating friction and texture, causes for friction changes over time, and aggregate and mix design to provide adequate friction. Also presented are construction and surface restoration practices for providing good pavement surface characteristics. In addition, considerations of noise and ride quality are discussed when compromise may be required.