Engine-room Simulator

Engine-room Simulator
Author: International Maritime Organization
Publisher: IMO Publishing
Total Pages: 104
Release: 2003
Genre: Marine diesel motors
ISBN: 9280141643

First published: IMO, 1990.

New Contributions in Information Systems and Technologies

New Contributions in Information Systems and Technologies
Author: Alvaro Rocha
Publisher: Springer
Total Pages: 397
Release: 2015-03-16
Genre: Technology & Engineering
ISBN: 3319165283

This book contains a selection of articles from The 2015 World Conference on Information Systems and Technologies (WorldCIST'15), held between the 1st and 3rd of April in Funchal, Madeira, Portugal, a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges of modern Information Systems and Technologies research, technological development and applications. The main topics covered are: Information and Knowledge Management; Organizational Models and Information Systems; Intelligent and Decision Support Systems; Big Data Analytics and Applications; Software Systems, Architectures, Applications and Tools; Multimedia Systems and Applications; Computer Networks, Mobility and Pervasive Systems; Human-Computer Interaction; Health Informatics; Information Technologies in Education; Information Technologies in Radio communications.

Simulated Voyages

Simulated Voyages
Author: Division on Engineering and Physical Sciences
Publisher: National Academies Press
Total Pages: 304
Release: 1996-04-21
Genre: Technology & Engineering
ISBN: 0309053838

This book assesses the state of practice and use of ship-bridge simulators in the professional development and licensing of deck officers and marine pilots. It focuses on full-mission computer-based simulators and manned models. It analyzes their use in instruction, evaluation and licensing and gives information and practical guidance on the establishment of training and licensing program standards, and on simulator and simulation validation.

Pounder's Marine Diesel Engines and Gas Turbines

Pounder's Marine Diesel Engines and Gas Turbines
Author: Malcolm Latarche
Publisher: Butterworth-Heinemann
Total Pages: 958
Release: 2020-12-01
Genre: Technology & Engineering
ISBN: 0081027850

Pounder's Marine Diesel Engines and Gas Turbines, Tenth Edition, gives engineering cadets, marine engineers, ship operators and managers insights into currently available engines and auxiliary equipment and trends for the future. This new edition introduces new engine models that will be most commonly installed in ships over the next decade, as well as the latest legislation and pollutant emissions procedures. Since publication of the last edition in 2009, a number of emission control areas (ECAs) have been established by the International Maritime Organization (IMO) in which exhaust emissions are subject to even more stringent controls. In addition, there are now rules that affect new ships and their emission of CO2 measured as a product of cargo carried. - Provides the latest emission control technologies, such as SCR and water scrubbers - Contains complete updates of legislation and pollutant emission procedures - Includes the latest emission control technologies and expands upon remote monitoring and control of engines

Discrete Choice Methods with Simulation

Discrete Choice Methods with Simulation
Author: Kenneth Train
Publisher: Cambridge University Press
Total Pages: 399
Release: 2009-07-06
Genre: Business & Economics
ISBN: 0521766559

This book describes the new generation of discrete choice methods, focusing on the many advances that are made possible by simulation. Researchers use these statistical methods to examine the choices that consumers, households, firms, and other agents make. Each of the major models is covered: logit, generalized extreme value, or GEV (including nested and cross-nested logits), probit, and mixed logit, plus a variety of specifications that build on these basics. Simulation-assisted estimation procedures are investigated and compared, including maximum stimulated likelihood, method of simulated moments, and method of simulated scores. Procedures for drawing from densities are described, including variance reduction techniques such as anithetics and Halton draws. Recent advances in Bayesian procedures are explored, including the use of the Metropolis-Hastings algorithm and its variant Gibbs sampling. The second edition adds chapters on endogeneity and expectation-maximization (EM) algorithms. No other book incorporates all these fields, which have arisen in the past 25 years. The procedures are applicable in many fields, including energy, transportation, environmental studies, health, labor, and marketing.

Microsoft Flight Simulator X For Pilots

Microsoft Flight Simulator X For Pilots
Author: Jeff Van West
Publisher: John Wiley & Sons
Total Pages: 752
Release: 2012-02-15
Genre: Games & Activities
ISBN: 1118080173

Get ready to take flight as two certified flight instructors guide you through the pilot ratings as it is done in the real world, starting with Sport Pilot training, then Private Pilot, followed by the Instrument Rating, Commercial Pilot, and Air Transport Pilot. They cover the skills of flight, how to master Flight Simulator, and how to use the software as a learning tool towards your pilot’s license. More advanced topics demonstrate how Flight Simulator X can be used as a continuing learning tool and how to simulate real-world emergencies.

Advancement in Emerging Technologies and Engineering Applications

Advancement in Emerging Technologies and Engineering Applications
Author: Chun Lin Saw
Publisher: Springer Nature
Total Pages: 424
Release: 2019-10-21
Genre: Science
ISBN: 9811500029

This volume contains selected and reviewed manuscripts from the 2nd Regional Conference on Mechanical and Marine Engineering (ReMME 2018), ‘Sustainable Through Engineering,’ which was held from November 7 to 9, 2018, at the Ipoh, Perak, Malaysia. This conference was organized by the Center of Refrigeration and Air Conditioning (CARe) and Center of Marine Engineering (CTME) Politeknik Ungku Omar, Jalan Raja Musa Mahadi, 31400 Ipoh, Perak. It discusses the expertise, skills, and techniques needed for the development of energy and renewable energy system, new materials and biomaterials, and marine technology. It focuses on finite element analysis, computational fluids dynamics, programming and mathematical methods that are used for engineering simulations, and present many state-of-the-art applications. For example, modern joining technologies can be used to fabricate new compound or composite materials, even those formed from dissimilar component materials. These composite materials are often exposed to harsh environments, must deliver specific characteristics, and are primarily used in automotive and marine technologies, i.e., ships, amphibious vehicles, docks, offshore structures, and even robots. An energy efficient methods such cogeneration, thermal energy storage and solar desalination also being highlighted as sustainable engineering in this book chapter. The committee members can be listed as follows: Patron:Dr. Hj. Zairon Mustapha (Director). Advisor: Muhmmad Zubir Mohd Hanifah (Deputy Director Academic), Dr. Azhar Abdullah (Head of Innovation, Research & Commercialization). Chairman 1: Dr. Adzuieen Nordin. Chairman 2: Hairi Haizri Che Amat. Secretariat 1: Dr. Woo Tze Keong. Secretariat 2: Dr. Saw Chun Lin. Secretary: Mahani Mohd Zamberi, Maslinda Rahmad. Floor Manager: Dr. Adzuieen Nordin, Marzuki Mohammad Treasurer: Shahrul Nahar Omar Kamal. Webmaster: Mohamad Asyraf Othoman, Mohd Assidiq Che Ahmad, Mohd Hashim Abd. Razak. Proceeding & Editorial: Didi Asmara Salim, Khairil Ashraf Ahmad Maliki, Khirwizam Md Hkhir. Publicity: Nur Azrina Zainal Ariff, Norsheila Buyamin, Rawaida Muhammad, Noor Khairunnisa Kamaruddin. Reviewer: Zakiman Zali, Shahril Jalil. Technical Manager: Mohd Faisol Saad. Springer Publication Editorial: Dr. Saw Chun Lin, Dr. Woo Tze Keong, Didi Asmara Salim, Dr. Salvinder Singh Karam Singh. Protocol & Opening Ceremony: Mohd Rizan Abdul, Yeoh Poh See. Souvenir: Sharifah Zainhuda Syed Tajul Ariffin. Registration: Muhammad Zaki Zainal, Adi Firdaus Hat, Nor Ashimy Mohd Noor, Mohd Naim Awang. Proofread: Shamsul Banu Mohamed Siddik, Fairuz Liza Shuhaimi. Logistics: Mohd Zulhairi Zulkipli, Ahmad Fithri Hasyimie Hashim. Multimedia: Muhammad Redzuan Che Noordin, Mohd Redzuwan Danuri, Ahmad Syawal Yeop Aziz. Liason: Roseazah Ramli, Amrul Zani Mahadi. Sponsorship: Zuraini Gani, Hazril Hisham Hussin.

Recent Developments in Mechatronics and Intelligent Robotics

Recent Developments in Mechatronics and Intelligent Robotics
Author: Feng Qiao
Publisher: Springer
Total Pages: 628
Release: 2017-11-11
Genre: Technology & Engineering
ISBN: 3319659782

This book gathers the Proceedings of the International Conference on Mechatronics and Intelligent Robotics (ICMIR2017), held in Kunming, China, on May 20–21, 2017. The book covers a total of 172 papers, which have been divided into seven different sections: Intelligent Systems, Intelligent Sensors & Actuators, Robotics, Mechatronics, Modeling & Simulation, Automation & Control, and Robot Vision. ICMIR2017 provided a vital forum for discussing the latest and most innovative ideas from both the industrial and academic worlds, and for sharing best practices in the fields of mechanical engineering, mechatronics, automatic control, electrical engineering, finite element analysis and computational engineering. The main focus of the conference was on promoting interaction between academia and industry, allowing the free exchange of ideas and challenges faced by these two key stakeholders and encouraging future collaboration between the members of these groups. The proceedings cover new findings in the following areas of research and will offer readers valuable insights: Mechatronics Intelligent mechatronics, robotics and biomimetics; Novel and unconventional mechatronic systems; Modeling and control of mechatronics systems; Elements, structures and mechanisms of micro and nano systems; Sensors, wireless sensor networks and multi-sensor data fusion; Biomedical and rehabilitation engineering, prosthetics and artificial organs; Artificial Intelligence (AI), neural networks and fuzzy logic in mechatronics and robotics; Industrial automation, process control and networked control systems; Telerobotics, Human–Computer Interaction; and Human–Robot Interaction. Robotics Artificial Intelligence; Bio-inspired robotics; Control algorithms and control systems; Design theories and principles; Evolutional robotics; Field robotics; Force sensors, accelerometers, and other measuring devices; Healthcare robotics; Human–Robot Interaction; Kinematics and dynamics analysis; Manufacturing robotics; Mathematical and computational methodologies in robotics; Medical robotics; Parallel robots and manipulators; Robotic cognition and emotion; Robotic perception and decisions; Sensor integration, fusion, and perception; and Social robotics.

Dynamic Positioning for Engineers

Dynamic Positioning for Engineers
Author: Surender Kumar
Publisher: CRC Press
Total Pages: 156
Release: 2020-10-28
Genre: Science
ISBN: 1000206432

Dynamic Positioning for Engineers enables the reader to acquire the basic knowledge of the concepts and understanding of the dynamic positioning (DP) system from the systems perspective. This book illustrates the system, subsystems and components of the DP system to better tackle maintenance, problems and breakdowns, leading to an increased mean time between failures and effective fault finding on dynamic positioning DP-related equipment. Overall, this text will help professionals reduce downtime and higher repair costs. Aimed at onboard electrical engineers, engine room watch officers, chief engineers, DP professionals onboard, in onshore officers and those taking DP training courses, this book: Explains automation and its application in the DP system Describes environmental sensors and position reference sensors as important inputs to the DP system Includes chapters on power management and thrusters Aids engineers in maintaining a the DP system in good operational condition