Electronic Structure and Optical Properties of Sb-based Self-assembled Quantum Dots for the Mid-infrared Range

Electronic Structure and Optical Properties of Sb-based Self-assembled Quantum Dots for the Mid-infrared Range
Author: Gik Hong Yeap
Publisher:
Total Pages:
Release: 2009
Genre:
ISBN:

Quantum dots (QDs) are zero-dimensional nanostructures that confined carriers in three dimensions comparable to their de Broglie wavelengths. Therefore, carriers exhibit?-shaped energy levels and densities of states. Due to their band structure, QD systems show significant advantages as active regions in laser cavities, both in term of lower threshold current densities and better thermal behaviour. The most studied system being InAs/GaAs system but the antimonide-based (Sb-based) material system has been paid much attention due to their potential for optical devices in the 3-5?m (0.25-0.40 eV) spectral regions and motivated by feasibility of active medium in high speed electronic and long wavelength photonic devices. In most cases, QDs structures had been obtained with an intrinsic elastic strain field arising from the lattice mismatch between the matrix and QD materials. The strain field plays a very significant role in the fabrication of the self-assembled QDs (SAQDs). Strain fields inside SAQD structures strongly affect the electronic band structure, which in turn, strongly affects the performance of optoelectronic devices. Therefore, knowledge and determination of the strain field in the dots and surrounding matrix is crucial in order to obtain a well ordered SAQDs structure. While knowledge and determination of the electronic structure calculation are necessary for further device modelling to improve the performance of the devices. Numerical work based on continuum-elasticity based on Finite Element Method (FEM) and standard-deformation-potential theory has been carried out to investigate the effect of strain on the band structure for InSb-based SAQD systems with type-I and type-II band alignment. The effect of elastic anisotropy on both strain distribution and band edges profile is also performed. Next, multi-band k?p method is used to model the electronic structure of InSb-based SAQD systems. The results from the modelling show that the strain-modified band profile of the zinc-blende III-V compound semiconductor SAQDs is not very sensitive to the details of the dot shape and the major governing parameter of the geometry is the aspect ratio of the dot. The modelling results also reveal that there are no appropriate material combinations for zinc-blende III-V compound semiconductors that would applicable for the MIR 3-5?m (0.25-0.40 eV) emission range when type-I band alignment is possible. This leads to the investigation of type-II broken gap InAsxSb(1-x)/InAs SAQDs. Finally, the optical properties of the InSb-based SAQDs are investigated by means of the photoluminescence (PL) measurement using Fourier transform infrared (FT-IR) spectroscopy. The PL results are analysed and compared to the modelling results.

Investigations of Electronic Structure and Optical Properties of Ii-Vi Self-assembled Quantum Dots

Investigations of Electronic Structure and Optical Properties of Ii-Vi Self-assembled Quantum Dots
Author: Tuan Anh Nguyen
Publisher:
Total Pages: 218
Release: 2006
Genre:
ISBN:

In this dissertation, we use different optical and imaging spectroscopy techniques to study electronic structure and optical properties of CdTe/ZnTe and CdSe/ZnSe self-assembled quantum dots (SAQDs). We perform single dot photoluminescence excitation experiments to identify carrier excitation mechanisms in CdTe/ZnTe QDs. The first mechanism is direct excitation into the QD excited states followed by relaxation to the ground state and the second mechanism is direct excitation into the QD ground states through LO phonon-assisted absorption. We then execute resonant PL measurements for both CdTe and CdSe QD ensembles to study the dependence of exciton-LO phonon coupling on QD size in these II-VI SAQDs. We shown that the strength of exciton-LO phonon coupling increases significantly for QDs with lateral sizes smaller than the exciton Bohr radius (e.g. as-grown CdTe QDs) while for larger QDs (e.g. CdSe or CdTe annealed) it is almost independent of the QD emission energy, and therefore presumably of the QD size. In order to study electronic coupling between SAQDs, we setup imaging experiments with the use of a hemisphere solid immersion lens. While the PLE imaging measurements show the existence two-dimensional platelets with a typical size of about 500 nm which provide spatially extended but strong localized states through which different QDs could be populated simultaneously, the spatially resolved imaging data demonstrates a complete 2D map of those platelets. These results are further supported by computational calculations based on finite element analysis. Low temperature exciton spin relaxation in symmetric CdTe SAQDs has been thoroughly studied by means of cw polarized magneto-PL and polarized time-resolved PL spectroscopies. We find that the degeneracy of exciton energy levels has a strong influence on the spin transition. When the exciton spin states in QDs are degenerate, the spin relaxation time is much shorter than the exciton recombination time. In contrast, if this degeneracy is removed, either by asymmetry or an external magnetic field, the spin relaxation time becomes much longer than the exciton recombination time. Using simple rate equation models, we estimate exciton spin relaxation times equal to 4.8 ns and 50 ps for non-degenerate and degenerate QD states, respectively.

Quantum Dots

Quantum Dots
Author: Michael Shur
Publisher: World Scientific
Total Pages: 214
Release: 2002
Genre: Science
ISBN: 9810249187

In this book, leading experts on quantum dot theory and technology provide comprehensive reviews of all aspects of quantum dot systems. The following topics are covered: (1) energy states in quantum dots, including the effects of strain and many-body effects; (2) self-assembly and self-ordering of quantum dots in semiconductor systems; (3) growth, structures, and optical properties of III-nitride quantum dots; (4) quantum dot lasers.

Self-Assembled Quantum Dots

Self-Assembled Quantum Dots
Author: Zhiming M Wang
Publisher: Springer Science & Business Media
Total Pages: 470
Release: 2007-11-29
Genre: Technology & Engineering
ISBN: 0387741917

This multidisciplinary book provides up-to-date coverage of carrier and spin dynamics and energy transfer and structural interaction among nanostructures. Coverage also includes current device applications such as quantum dot lasers and detectors, as well as future applications to quantum information processing. The book will serve as a reference for anyone working with or planning to work with quantum dots.

Structural, Optical and Spectral Behaviour of InAs-based Quantum Dot Heterostructures

Structural, Optical and Spectral Behaviour of InAs-based Quantum Dot Heterostructures
Author: Saumya Sengupta
Publisher: Springer
Total Pages: 77
Release: 2017-08-04
Genre: Technology & Engineering
ISBN: 9811057028

This book explores the effects of growth pause or ripening time on the properties of quantum dots(QDs). It covers the effects of post-growth rapid thermal annealing (RTA) treatment on properties of single layer QDs. The effects of post-growth rapid thermal annealing (RTA) treatment on properties of single layer QDs are discussed. The book offers insight into InAs/GaAs bilayer QD heterostructures with very thin spacer layers and discusses minimum spacer thickness required to grow electronically coupled bilayer QD heterostructures. These techniques make bilayer QD heterostructures a better choice over the single layer and uncoupled multilayer QD heterostructure. Finally, the book discusses sub-monolayer (SML) growth technique to grow QDs. This recent technique has been proven to improve the device performance significantly. The contents of this monograph will prove useful to researchers and professionals alike.

The Optical Response of Semiconductor Self-Assembled Quantum Dots

The Optical Response of Semiconductor Self-Assembled Quantum Dots
Author: Zhifeng Wei
Publisher: Open Dissertation Press
Total Pages:
Release: 2017-01-27
Genre:
ISBN: 9781374667532

This dissertation, "The Optical Response of Semiconductor Self-assembled Quantum Dots" by Zhifeng, Wei, 魏志鋒, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: Abstract of thesis entitled THE OPTICAL RESPONSE OF SEMICONDUCTOR SELF-ASSEMBLED QUANTUM DOTS Submitted by Wei Zhifeng for the degree of Doctor of Philosophy at The University of Hong Kong in May 2006 Self-assembled quantum dots (QDs) are one type of tiny coherent islands which spontaneously form via the Stranski-Krastanow (S-K) growth mode during the heteroepitaxial growth of lattice-mismatched thin films. They have attracted considerable interest in recent years because of their atom-like properties and many potential applications in novel electronic and photonic devices. A detailed investigation on the optical properties of semiconductor QDs was presented in this thesis project. The variable-temperature photoluminescence (PL) spectra of two kinds of InGaAs QDs with and without a GaAs cap layer were comparatively investigated. It was found that the optical properties of the buried QDs with the cap layer differ significantly from those of the surface QDs. The growth of cap layer can improve the dots uniformity indicated by the narrow PL peak, greatly enhance the luminescence efficiency, and result in a large blueshift of the emission peak due to the strain environment change of the QDs. The cap layer also improves the thermal stability of the QD emission. The spontaneous emission mechanisms of two quaternary self-assembled GaInAsN QDs with different compositions and growth thicknesses have been studied. Adopting a newly developed localized-states luminescence model, the temperature behavior of the emissions from the two GaInAsN QDs has been quantitatively interpreted. The physical pictures of the spontaneous emissions of GaInAsN QDs were established. For the self-assembled QDs, a strained thin layer underneath the QDs always exists and this two-dimensional thin layer is called the wetting layer (WL). A quantitative study on the role of WL in the luminescence process of InAs/GaAs self- assembled QDs has been conducted. It has been shown that the WL acts as an efficient bridge not only in the relaxation of carriers from the barrier layer to the QDs but also in the thermal escaping of the carriers already captured by the QDs. Since the knowledge of electronic structure and optical transitions of self- assembled QDs is essentially important for the infrared detection applications of the QDs, a precise PL spectroscopic probe of the electronic structures of InAs/GaAs QDs with various silicon doping concentrations has been carried out. The theoretical predicted blueshift of the fundamental transitions of the QDs has been observed as the Si doping concentration and thus the number of electrons loaded into the dot is increased. It was also found that the Si δ-doping at the central regions of barrier layers during the growth of multi-layered QDs can significantly improve the luminescence efficiency of the samples at higher temperatures. Growth and optical characterizations of the electrically coupled InAs and InP QD stacking structures have been done. The study provides a possible way to produce a new type of broad-band QD light emitting diodes via the so-called band-engineering method. DOI: 10.5353/th_b3709820 Subjects: Quantum dots Semiconductors - Optical properties

Handbook of Self Assembled Semiconductor Nanostructures for Novel Devices in Photonics and Electronics

Handbook of Self Assembled Semiconductor Nanostructures for Novel Devices in Photonics and Electronics
Author: Mohamed Henini
Publisher: Elsevier Science
Total Pages: 841
Release: 2008
Genre: Technology & Engineering
ISBN: 9780080463254

In 1969, Leo Esaki (1973 Nobel Laureate) and Ray Tsu from IBM, USA, proposed research on “man-made crystals” using a semiconductor superlattice (a semiconductor structure comprising several alternating ultra-thin layers of semiconductor materials with different properties). This invention was perhaps the first proposal to advocate the engineering of a new semiconductor material, and triggered a wide spectrum of experimental and theoretical investigations. However, the study of what are now called low dimensional structures (LDS) began in the late 1970's when sufficiently thin epitaxial layers were first produced following developments in the technology of epitaxial growth of semiconductors, mainly pioneered in industrial laboratories for device purposes. The LDS are materials structures whose dimensions are comparable with inter-atomic distances in solids (i.e. nanometre, nm). Their electronic properties are significantly different from the same material in bulk form. These properties are changed by quantum effects. At the inception of their investigation it was already clear that such structures were of great scientific interest and excitement and their novel properties caused by quantum effects offered potential for application in new devices. Moreover these complex LDS offer device engineers new design opportunities for tailor-made new generation electronic devices. The LDS could be considered as a new branch of condensed matter physics because of the large variety of possible structures and the changes in the physical processes. One of the promising fabrication methods to produce and study structures with a dimension less than two such as quantum wires and quantum dots, in order to realise novel devices that make use of low-dimensional confinement effects, is self-organisation. Self-assembled nanostructured materials offer a number of advantages over conventional material technologies in a wide-range of sectors. Clearly, future research work on self-assembled nanostructures will connect diverse areas of material science, physics, chemistry, electronics and optoelectronics. Key Features: - Contributors are world leaders in the field - Brings together all the factors which are essential in self-organisation of quantum nanostructures - Reviews the current status of research and development in self-organised nanostructured materials - Provides a ready source of information on a wide range of topics - Useful to any scientist who is involved in nanotechnology - Excellent starting point for workers entering the field - Serves as an excellent reference manual

Self-Assembled InGaAs/GaAs Quantum Dots

Self-Assembled InGaAs/GaAs Quantum Dots
Author:
Publisher: Academic Press
Total Pages: 385
Release: 1999-03-29
Genre: Technology & Engineering
ISBN: 0080864589

This volume is concerned with the crystal growth, optical properties, and optical device application of the self-formed quantum dot, which is one of the major current subjects in the semiconductor research field.The atom-like density of states in quantum dots is expected to drastically improve semiconductor laser performance, and to develop new optical devices. However, since the first theoretical prediction for its great possibilities was presented in 1982, due to the difficulty of their fabrication process. Recently, the advent of self-organized quantum dots has made it possible to apply the results in important optical devices, and further progress is expected in the near future.The authors, working for Fujitsu Laboratories, are leading this quantum-dot research field. In this volume, they describe the state of the art in the entire field, with particular emphasis on practical applications.