Dynamometer

Dynamometer
Author: Jyotindra S. Killedar
Publisher: Xlibris Corporation
Total Pages: 609
Release: 2012-10-25
Genre: Technology & Engineering
ISBN: 1477120084

It all began way back in 1984 when I began my career in the field of dynamometer and engine testing when after years of gut-feeling and study I realized that there is a need for a book on dynamometer and its application to engine testing. As automotive and dynamometer industry is growing worldwide the concern eventually became so great I felt a book devoted to the subject was warranted. The book Dynamometer-Theory and Application to Engine Testing is a book dedicated to various dynamometers and how they are applied to engine testing. The book also discusses the essentials of modern test cell and the instrumentation, data acquisition system and other accessories that are employed in modern test cell. After having worked in the filed of industrial compressors, pumps, material handling equipment, dynamometer field and software industry I decided to write this book which will help the people working in the automotive industry, engine and vehicle testing, people working in the dynamometer and instrumentation industry and electrical motor industry. The book will be of interest to the studenrs of mechanical and automobile engineering. The book will be of great value to the incumbents entering in the automotive and dynamometer fields.

Dynamometers

Dynamometers
Author: Frederick John Jervis-Smith
Publisher:
Total Pages: 302
Release: 1915
Genre: Dynamometer
ISBN:

Diesel Engine Transient Operation

Diesel Engine Transient Operation
Author: Constantine D. Rakopoulos
Publisher: Springer Science & Business Media
Total Pages: 408
Release: 2009-03-10
Genre: Technology & Engineering
ISBN: 1848823754

Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle’s operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.

THEORY OF MECHANISMS AND MACHINES

THEORY OF MECHANISMS AND MACHINES
Author: C. S. SHARMA
Publisher: PHI Learning Pvt. Ltd.
Total Pages: 728
Release: 2006-01-01
Genre: Technology & Engineering
ISBN: 9788120329010

Intended to cater to the needs of undergraduate students in mechanical, production, and industrial engineering disciplines, this book provides a comprehensive coverage of the fundamentals of analysis and synthesis (kinematic and dynamic) of mechanisms and machines. It clearly describes the techniques needed to test the suitability of a mechanical system for a given task and to develop a mechanism or machine according to the given specifications. The text develops, in addition, a strong understanding of the kinematics of mechanisms and discusses various types of mechanisms such as cam-and-follower, gears, gear trains and gyroscope.

Machining Technology

Machining Technology
Author: Helmi A. Youssef
Publisher: CRC Press
Total Pages: 672
Release: 2008-04-23
Genre: Technology & Engineering
ISBN: 1420043404

Offering complete coverage of the technologies, machine tools, and operations of a wide range of machining processes, Machining Technology presents the essential principles of machining and then examines traditional and nontraditional machining methods. Available for the first time in one easy-to-use resource, the book elucidates the fundame