Diseño y desarrollo de componentes de plástico inyectados (II): la pieza

Diseño y desarrollo de componentes de plástico inyectados (II): la pieza
Author: Castany, Javier
Publisher: Prensas de la Universidad de Zaragoza
Total Pages: 249
Release: 2014-09-11
Genre: Technology & Engineering
ISBN: 8416272034

El diseño de las piezas de plástico reúne una serie de aspectos diferenciales en relación con el diseño de piezas con materiales convencionales. En este libro se pretenden exponer los principios que hacen que un diseñador industrial tenga criterio y pueda analizar y juzgar la bondad de un diseño. El objetivo es proporcionar los modelos generales de comportamiento mecánico\resistente, así como los de algunos componentes específicos comúnmente utilizados y que forman parte tanto de los bienes de consumo como de manufactura. El libro pretende tener como lector al estudiante de últimos cursos de las ramas de Ingeniería que le son sensibles, fundamentalmente Ingeniería Industrial, Mecánica o Diseño, y a los técnicos de las empresas implicados en el proceso de diseño de piezas o componentes de plástico.

The North American Mosaic

The North American Mosaic
Author: Commission for Environmental Cooperation (Montréal, Québec). Secretariat
Publisher:
Total Pages: 240
Release: 2001
Genre: Agriculture
ISBN:

The North American Mosaic has four overarching features. First, it is, to the extent feasible, based on comparable information on the status and trends of major indicators of the state of the environment in Canada,Mexico, and the United States. Second, the report confirms that these three countries together make up an incredibly complex, dynamic, and interconnected ecosystem in which humans play a dominant and decisive role. Third, the report raises important and sometimes disquieting questions concerning the sustainability of some current trends. Finally, the report is a reminder that our economic, social, and physical well-being are utterly dependent on the life-sustaining services provided by nature. This report emphasizes the importance of developing mutually compatible economic, social, and environmental goals and policies across the three-country region.

Diseño y desarrollo de componentes de plástico inyectados (I): el material

Diseño y desarrollo de componentes de plástico inyectados (I): el material
Author: Castany, Francisco Javier
Publisher: Universidad de Zaragoza
Total Pages: 230
Release: 2013-06-18
Genre:
ISBN: 8415770928

Como objetivo primordial, se intenta dar una visión global pero fundada, de las propiedades de los materiales termoplásticos que permitan al técnico de la planta de transformación, entender los procesos y cambios que sufre el material durante su transformación, y más en concreto por inyección; al técnico de diseño, saber en qué propiedades basarse para el diseño del producto en función de la solicitación de la pieza; y al técnico de calidad, comprender hasta qué punto son útiles los principales ensayos físicos de caracterización que se realizan para ser aplicados en los departamentos anteriormente citados, planta y oficina técnica.

Beverages

Beverages
Author: A. Varnam
Publisher: Springer Science & Business Media
Total Pages: 474
Release: 2012-12-06
Genre: Science
ISBN: 146152508X

Beverages provides thorough and integrated coverage in a user-friendly way, and is the second of an important series dealing with major food product groups. It is an invaluable learning and teaching aid and is also of great use to the food industry and regulatory personnel.

Milk and Meat from the Camel

Milk and Meat from the Camel
Author: Omar Abdulkadir Sh. Abdurahman
Publisher: vdf Hochschulverlag AG
Total Pages: 240
Release: 2004
Genre: Medical
ISBN: 9783728125279

Camel husbandry is becoming increasingly important in the arid zones of Africa. The camel has long been the mainstay of pastoral societies due to its drought tolerance, reliable milk and meat supply and ability to feed on a wide variety of plants. In the last few years, however, camels are also seen more and more in semi-arid rangelands, especially where overgrazing has depleted the grasses and increased the relative importance of shrubs. In spite of this growing importance, research on camel was limited until the early seventies to studies on topics such as anatomy, physiology, behaviour and to a lesser extent disease. However, since the early eighties the interest of the research on camels has been growing. Most advances have been made in reproductive physiology, veterinary and in the biochemistry of milk, while practical oriented research on improving camel productivity by developing marketable products targeting small and middle enterprises regrettably received little attention. This book attempts to fill this gap. The authors have profound knowledge on use of the camel as milk and meat animal. This knowledge is based on results of research work carried out in partnership with universities, camel farmers and pastoralists in Eastern African countries. The first part deals with chemical composition, technological properties, hygienic safety and quality control of camel milk. This is followed by the presentation of processing methods for different dairy products which should allow smallholder producers to process milk on farm or in centralised small scale dairy unit. In the second part special knowledge gained in slaughtering, deboning and processing of camels on-site over several years of long-term stays on the Ol Maisor Farm in Kenya is presented. During the development of camel meat products the authors set a great value on the keeping quality of the products as well as creating a wide range of product groups with low and high cost for the local market and a good shelf life. The book presents background information and recipes on the manufacture of camel milk and meat products and it is intended as a practical guide to professionals, government bodies and development agencies interested in building up small scale processing units for camel meat and milk products. It is hoped that it may also serve as a reference for extension personal working with camel herders, food scientists and students. The book is concerned entirely with the one-humped camel (Camelus dromedarius). The term "camel" should, therefore, be taken to refer to this species unless specifically stated otherwise.

Surgical Wound Healing and Management

Surgical Wound Healing and Management
Author: Mark S. Granick
Publisher: CRC Press
Total Pages: 192
Release: 2012-09-24
Genre: Medical
ISBN: 1841849278

Surgical Wound Healing and Management, Second Edition explores the critical role of surgery in wound bed preparation and management, and provides a sound knowledge of wound mechanisms, physiology, and metabolic control. Founded on the expertise of internationally recognized authorities, this source illustrates the many techniques utilized by surgeons to design optimal healing environments, maximize the efficacy of existing treatment modalities, and extract bacteria from a variety of wound situations resulting from burns, trauma, and disease.

Textbook of Sexual Medicine

Textbook of Sexual Medicine
Author: Robert C. Kolodny
Publisher: Little, Brown Medical Division
Total Pages: 664
Release: 1979
Genre: Medical
ISBN:

Chapter 17: "Homosexuality".

At the Hand of Man

At the Hand of Man
Author: Raymond Bonner
Publisher: Vintage
Total Pages: 421
Release: 2013-02-20
Genre: Nature
ISBN: 0307830594

Defying conventional wisdom even as it makes an impassioned plea for moral common sense, this book by an award-winning journalist sheds a new light on the history and politics of the African conservation movement. The book will anger and inspire anyone who cares about African wildlife and the people whose future is intertwined with the fate of these animals.