Cyclic Plasticity of Metals

Cyclic Plasticity of Metals
Author: Hamid Jahed
Publisher: Elsevier
Total Pages: 470
Release: 2021-11-11
Genre: Technology & Engineering
ISBN: 0128192941

Cyclic Plasticity of Metals: Modeling Fundamentals and Applications provides an exhaustive overview of the fundamentals and applications of various cyclic plasticity models including forming and spring back, notch analysis, fatigue life prediction, and more. Covering metals with an array of different structures, such as hexagonal close packed (HCP), face centered cubic (FCC), and body centered cubic (BCC), the book starts with an introduction to experimental macroscopic and microscopic observations of cyclic plasticity and then segues into a discussion of the fundamentals of the different cyclic plasticity models, covering topics such as kinematics, stress and strain tensors, elasticity, plastic flow rule, and an array of other concepts. A review of the available models follows, and the book concludes with chapters covering finite element implementation and industrial applications of the various models. - Reviews constitutive cyclic plasticity models for various metals and alloys with different cell structures (cubic, hexagonal, and more), allowing for more accurate evaluation of a component's performance under loading - Provides real-world industrial context by demonstrating applications of cyclic plasticity models in the analysis of engineering components - Overview of latest models allows researchers to extend available models or develop new ones for analysis of an array of metals under more complex loading conditions

Cyclic Plasticity of Metals

Cyclic Plasticity of Metals
Author: Hamid Jahed
Publisher: Elsevier
Total Pages: 468
Release: 2021-11-16
Genre: Technology & Engineering
ISBN: 0128192933

Cyclic Plasticity of Metals: Modeling Fundamentals and Applications provides an exhaustive overview of the fundamentals and applications of various cyclic plasticity models including forming and spring back, notch analysis, fatigue life prediction, and more. Covering metals with an array of different structures, such as hexagonal close packed (HCP), face centered cubic (FCC), and body centered cubic (BCC), the book starts with an introduction to experimental macroscopic and microscopic observations of cyclic plasticity and then segues into a discussion of the fundamentals of the different cyclic plasticity models, covering topics such as kinematics, stress and strain tensors, elasticity, plastic flow rule, and an array of other concepts. A review of the available models follows, and the book concludes with chapters covering finite element implementation and industrial applications of the various models. Reviews constitutive cyclic plasticity models for various metals and alloys with different cell structures (cubic, hexagonal, and more), allowing for more accurate evaluation of a component's performance under loading Provides real-world industrial context by demonstrating applications of cyclic plasticity models in the analysis of engineering components Overview of latest models allows researchers to extend available models or develop new ones for analysis of an array of metals under more complex loading conditions

Cyclic Plasticity of Engineering Materials

Cyclic Plasticity of Engineering Materials
Author: Guozheng Kang
Publisher: John Wiley & Sons
Total Pages: 320
Release: 2017-05-01
Genre: Technology & Engineering
ISBN: 1119180805

New contributions to the cyclic plasticity of engineering materials Written by leading experts in the field, this book provides an authoritative and comprehensive introduction to cyclic plasticity of metals, polymers, composites and shape memory alloys. Each chapter is devoted to fundamentals of cyclic plasticity or to one of the major classes of materials, thereby providing a wide coverage of the field. The book deals with experimental observations on metals, composites, polymers and shape memory alloys, and the corresponding cyclic plasticity models for metals, polymers, particle reinforced metal matrix composites and shape memory alloys. Also, the thermo-mechanical coupled cyclic plasticity models are discussed for metals and shape memory alloys. Key features: Provides a comprehensive introduction to cyclic plasticity Presents Macroscopic and microscopic observations on the ratchetting of different materials Establishes cyclic plasticity constitutive models for different materials. Analysis of cyclic plasticity in engineering structures. This book is an important reference for students, practicing engineers and researchers who study cyclic plasticity in the areas of mechanical, civil, nuclear, and aerospace engineering as well as materials science.

Plasticity and Creep of Metals

Plasticity and Creep of Metals
Author: Andrew Rusinko
Publisher: Springer Science & Business Media
Total Pages: 442
Release: 2011-07-24
Genre: Science
ISBN: 3642212131

This book serves both as a textbook and a scientific work. As a textbook, the work gives a clear, thorough and systematic presentation of the fundamental postulates, theorems and principles and their applications of the classical mathematical theories of plasticity and creep. In addition to the mathematical theories, the physical theory of plasticity, the book presents the Budiansky concept of slip and its modification by M. Leonov. Special attention is given to the analysis of the advantages and shortcomings of the classical theories. In its main part, the book presents the synthetic theory of irreversible deformations, which is based on the mathematical Sanders flow plasticity theory and the physical theory, the Budiansky concept of slip. The main peculiarity of the synthetic theory is that the formulae for both plastic and creep deformation, as well their interrelations, can be derived from the single constitutive equation. Furthermore, the synthetic theory, as physical one, can take into account the real processes that take place in solids at irreversible deformation. This widens considerably the potential of the synthetic theory. In the framework of the synthetic theory such problems as creep delay, the Hazen-Kelly effect, the deformation at the break of the load trajectory, the influence of the rate of loading on the stress-strain diagram, creep at the changes of load, creep at unloading and reversed creep, have been analytically described. In the last chapter, the book shows the solution of some contemporary problems of plasticity and creep: Creep deformation at cyclic abrupt changes of temperature, The influence of irradiation on the plastic and creep deformation, Peculiarities of deformation at the phase transformation of some metals.

Crystal Plasticity Finite Element Methods

Crystal Plasticity Finite Element Methods
Author: Franz Roters
Publisher: John Wiley & Sons
Total Pages: 188
Release: 2011-08-04
Genre: Technology & Engineering
ISBN: 3527642099

Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.

Ultra-low-Cycle Fatigue Failure of Metal Structures under Strong Earthquakes

Ultra-low-Cycle Fatigue Failure of Metal Structures under Strong Earthquakes
Author: Liang-Jiu Jia
Publisher: Springer
Total Pages: 231
Release: 2018-11-02
Genre: Science
ISBN: 9811326614

This book presents experimental results and theoretical advances in the field of ultra-low-cycle fatigue failure of metal structures under strong earthquakes, where the dominant failure mechanism is ductile fracture. Studies on ultra-low-cycle fatigue failure of metal materials and structures have caught the interest of engineers and researchers from various disciplines, such as material, civil and mechanical engineering. Pursuing a holistic approach, the book establishes a fundamental framework for this topic, while also highlighting the importance of theoretical analysis and experimental results in the fracture evaluation of metal structures under seismic loading. Accordingly, it offers a valuable resource for undergraduate and graduate students interested in ultra-low-cycle fatigue, researchers investigating steel and aluminum structures, and structural engineers working on applications related to cyclic large plastic loading conditions.

The Mechanics of Constitutive Modeling

The Mechanics of Constitutive Modeling
Author: Niels Saabye Ottosen
Publisher: Elsevier
Total Pages: 700
Release: 2005-09-28
Genre: Science
ISBN: 0080525695

Constitutive modelling is the mathematical description of how materials respond to various loadings. This is the most intensely researched field within solid mechanics because of its complexity and the importance of accurate constitutive models for practical engineering problems. Topics covered include: Elasticity - Plasticity theory - Creep theory - The nonlinear finite element method - Solution of nonlinear equilibrium equations - Integration of elastoplastic constitutive equations - The thermodynamic framework for constitutive modelling – Thermoplasticity - Uniqueness and discontinuous bifurcations • More comprehensive in scope than competitive titles, with detailed discussion of thermodynamics and numerical methods. • Offers appropriate strategies for numerical solution, illustrated by discussion of specific models. • Demonstrates each topic in a complete and self-contained framework, with extensive referencing.

Cyclic Plasticity of Engineering Materials

Cyclic Plasticity of Engineering Materials
Author: Guozheng Kang
Publisher: John Wiley & Sons
Total Pages: 552
Release: 2017-03-10
Genre: Technology & Engineering
ISBN: 1119180821

New contributions to the cyclic plasticity of engineering materials Written by leading experts in the field, this book provides an authoritative and comprehensive introduction to cyclic plasticity of metals, polymers, composites and shape memory alloys. Each chapter is devoted to fundamentals of cyclic plasticity or to one of the major classes of materials, thereby providing a wide coverage of the field. The book deals with experimental observations on metals, composites, polymers and shape memory alloys, and the corresponding cyclic plasticity models for metals, polymers, particle reinforced metal matrix composites and shape memory alloys. Also, the thermo-mechanical coupled cyclic plasticity models are discussed for metals and shape memory alloys. Key features: Provides a comprehensive introduction to cyclic plasticity Presents Macroscopic and microscopic observations on the ratchetting of different materials Establishes cyclic plasticity constitutive models for different materials. Analysis of cyclic plasticity in engineering structures. This book is an important reference for students, practicing engineers and researchers who study cyclic plasticity in the areas of mechanical, civil, nuclear, and aerospace engineering as well as materials science.

Mechanics of Solid Materials

Mechanics of Solid Materials
Author: Jean Lemaitre
Publisher: Cambridge University Press
Total Pages: 588
Release: 1994-08-25
Genre: Science
ISBN: 9780521477581

Translation of hugely successful book aimed at advanced undergraduates, graduate students and researchers.