Occupational Exposure to Titanium Dioxide

Occupational Exposure to Titanium Dioxide
Author: Department of Health and Human Services
Publisher: CreateSpace
Total Pages: 140
Release: 2013-10
Genre: Technology & Engineering
ISBN: 9781493529780

The purpose of the Occupational Safety and Health Act of 1970 (Public Law 91–596) is to assure safe and healthful working conditions for every working person and to preserve our human resources. In this Act, the National Institute for Occupational Safety and Health (NIOSH) is charged with recommending occupational safety and health standards and describing exposures that are safe for various periods of employment, including (but not limited to) the exposures at which no worker will suffer diminished health, functional capacity, or life expectancy as a result of his or her work experience. Current Intelligence Bulletins (CIBs) are issued by NIOSH to disseminate new scientific information about occupational hazards. A CIB may draw attention to a formerly unrecognized hazard, report new data on a known hazard, or disseminate information about hazard control. CIBs are distributed to representatives of academia, industry, organized labor, public health agencies, and public interest groups as well as to federal agencies responsible for ensuring the safety and health of workers. Titanium dioxide (TiO2), an insoluble white powder, is used extensively in many commercial products, including paint, cosmetics, plastics, paper, and food, as an anticaking or whitening agent. It is produced and used in the workplace in varying particle-size fractions, including fine and ultrafine sizes. The number of U.S. workers currently exposed to TiO2 dust is unknown. This NIOSH CIB, based on our assessment of the current available scientific information about this widely used material, (1) reviews the animal and human data relevant to assessing the carcinogenicity and other adverse health effects of TiO2, (2) provides a quantitative risk assessment using dose-response information from the rat and human lung dosimetry modeling and recommended occupational exposure limits for fine and ultrafine (including engineered nanoscale) TiO2, and (3) describes exposure monitoring techniques, exposure control strategies, and research needs. This report only addresses occupational exposures by inhalation, and conclusions derived here should not be inferred to pertain to nonoccupational exposures.

Current Intelligence Bulletin 63

Current Intelligence Bulletin 63
Author: Centers for Disease Control and Prevention
Publisher: CreateSpace
Total Pages: 138
Release: 2013-11-30
Genre: Health & Fitness
ISBN: 9781494259525

In this Current Intelligence Bulletin, the National Institute for Occupational Safety and Health (NIOSH) reviews the animal and human data relevant to assessing the carcinogenicity of titanium dioxide (TiO2) (Chapters 2 and 3), presents a quantitative risk assessment using dose-response data in rats for both cancer (lung tumors) and noncancer (pulmonary inflammation) responses and extrapolation to humans with lung dosimetry modeling (Chapter 4), provides recommended exposure limits (RELs) for fine and ultrafine (including engineered nanoscale) TiO2 (Chapter 5), describes exposure monitoring techniques and exposure control strategies (Chapter 6), and discusses avenues of future research (Chapter 7). This report only addresses occupational exposures by inhalation, and conclusions derived here should not be inferred to pertain to nonoccupational exposures.

Registry of Toxic Effects of Chemical Substances

Registry of Toxic Effects of Chemical Substances
Author: National Institute for Occupational Safety and Health
Publisher:
Total Pages: 1000
Release: 1981
Genre: Industrial toxicology
ISBN:

"This compilation will provide ready reference for potential toxicity of chemicals found in the workplace, and should be useful to occupational health physicians, industrial hygienists, toxicologists, and researchers." Alphabetical arrangement by substances. Entries include such details as molecular weight, Wiswesser Line Notation, synonyms, and reference from which data about toxicity derived. Miscellaneous appendixes, including one titled Aquatic toxicity. Bibliographic references.

Nanotoxicology and Nanosafety 2.0

Nanotoxicology and Nanosafety 2.0
Author: Ying-Jan Wang
Publisher: MDPI
Total Pages: 320
Release: 2020-12-29
Genre: Science
ISBN: 303936748X

With the rapid development of nanotechnology, nanomaterials have been widely applied in many industrial sectors, including medicine, consumer products, and electronics. While such technology has brought benefits and convenience to our daily lives, it may also potentially threaten human health. In some cases, nanomaterials present unexpected risks to both humans and the environment. Assessments of the potential hazards associated with nanotechnology have been emerging, but substantial challenges remain, because the large number of different nanomaterials cannot be effectively evaluated in a timely manner. The development of a good strategy for a nanomaterials hazard assessment not only promotes the more widespread adoption of non-rodent or 3Rs principles, but also makes nanotoxicology testing more ethical, relevant, and cost- and time-efficient. A thorough understanding of the mechanisms by which nanomaterials perturb biological systems is critical for a more comprehensive elucidation of their nanotoxicity, and this will also facilitate the development of prevention and intervention policies against adverse outcomes induced by them. We hope that the articles included in this eBook can provide updated knowledge on nanotoxicology and nanosafety, from the point of view of both toxicology and ecotoxicology.

Nanomaterials

Nanomaterials
Author: Fouad Sabry
Publisher: One Billion Knowledgeable
Total Pages: 383
Release: 2022-01-16
Genre: Technology & Engineering
ISBN:

What Is Nanomaterials Nanomaterials describe, in principle, materials of which a single unit small sized between 1 and 100 nm. How You Will Benefit (I) Insights, and validations about the following topics: Chapter 1: Nanomaterials Chapter 2: Nanoporous materials Chapter 3: Nanoparticle Chapter 4: Characterization of nanoparticles Chapter 5: Applications of nanotechnology Chapter 6: Nanometrology Chapter 7: Materials science (II) Answering the public top questions about nanomaterials. (III) Real world examples for the usage of nanomaterials in many fields. (IV) 17 appendices to explain, briefly, 266 emerging technologies in each industry to have 360-degree full understanding of nanomaterials' technologies. Who This Book Is For Professionals, undergraduate and graduate students, enthusiasts, hobbyists, and those who want to go beyond basic knowledge or information for any kind of nanomaterials.

Nanomaterial Biointeractions at the Cellular, Organismal and System Levels

Nanomaterial Biointeractions at the Cellular, Organismal and System Levels
Author: Nilesh Sharma
Publisher: Springer Nature
Total Pages: 462
Release: 2021-03-26
Genre: Science
ISBN: 3030657922

The range of nanomaterial applications has expanded recently from catalysis, electronics, and filtration to therapeutics, diagnostics, agriculture, and food because of unique properties and potentials of different nanoparticles and nanomaterials. Research shows that these exquisite particles can interact with an organism at the cellular, physiological, biochemical, and molecular levels. However, our knowledge of how they affect these changes, selectively or generally, in diverse organism or ecosystems is very limited and far from satisfactory. Data indicate that the biological function largely depends on the shape, size, and surface characteristics of the nanoparticles used besides life cycle stages of an organism. Therefore, this compilation will focus on the body of work carried out by distinguished investigators using diverse nanomaterials and plant and animal species. This book includes specific case studies as well as general review articles highlighting aspects of multilayered interactions, and targets not only research and academic scholars but also the concerned industry and policy makers as well.

Exposure to Engineered Nanomaterials in the Environment

Exposure to Engineered Nanomaterials in the Environment
Author: Nelson Marmiroli
Publisher: Elsevier
Total Pages: 362
Release: 2019-05-28
Genre: Science
ISBN: 0128148365

Exposure to Engineered Nanomaterials in the Environment provide a new, holistic framework for testing and evaluating the potential benefits and risks of engineered nanomaterials (ENMs), including their potential socioeconomic impacts, ethical issues and consumers’ expectations and fears. The book covers nanomaterial presence in various environments, agroecosystems and other areas within the human sphere of actions. The book includes sections on (i) Chemical, physical and biological properties, (ii) Presence and diffusion of ENMs in human environments, agriculture, food and drug products, (iii) ENMs as a pillar in biological and medical research, and (iv) Social and regulatory issues emerging from years of application. The book is designed to increase awareness to key end-users and stakeholders, including food producers and processors, industry, representatives of society and consumers, and those looking to implement an accurate and effective risk analysis procedure that promotes the sustainable use of nanotechnology. Assesses both the positive and negative impacts of engineered nanomaterials in the environment Shows how engineered nanomaterials are used in agricultural environments, food products, drugs and cosmetics Discusses the unique properties of a range of engineered nanomaterials that lead to their environmental effects