Controlled Directional Drilling

Controlled Directional Drilling
Author: Joao Luiz Vieira
Publisher: Petroleum Extension Service
Total Pages: 133
Release: 2009-07-01
Genre: Directional drilling
ISBN: 9780886982546

Rev. ed. of: Controlled directional drilling. 1984.

Introduction to Directional and Horizontal Drilling

Introduction to Directional and Horizontal Drilling
Author: J. A. Short
Publisher: Pennwell Books
Total Pages: 256
Release: 1993
Genre: Technology & Engineering
ISBN:

In this book, Short introduces the reader to directional and horizontal drilling. They are timely drilling techniques gaining increasing usage. This text is the fourth and latest book Short has written about the oil and gas industry. He shares with his readers the knowledge that he has acquired through years of experience.

Controlled Directional Drilling

Controlled Directional Drilling
Author: Nancy J. Janicek
Publisher: Petroleum Extension Service
Total Pages: 0
Release: 1984
Genre: Directional drilling
ISBN: 9780886980993

An introduction to the science of controlled directional drilling. Gives the types and uses of directional holes, how a well is planned, what information and equipment are needed and how they are obtained and used, and some of the problems associated with directional drilling.

Underbalanced Drilling: Limits and Extremes

Underbalanced Drilling: Limits and Extremes
Author: Bill Rehm
Publisher: Elsevier
Total Pages: 680
Release: 2013-11-25
Genre: Science
ISBN: 0127999809

The present crude oil and natural gas reservoirs around the world have depleted conventional production levels. To continue enhancing productivity for the remaining mature reservoirs, drilling decision-makers could no longer rely on traditional balanced or overbalanced methods of drilling. Derived from conventional air drilling, underbalanced drilling is increasingly necessary to meet today’s energy and drilling needs. While more costly and extreme, underbalanced drilling can minimize pressure within the formation, increase drilling rate of penetration, reduce formation damage and lost circulation, making mature reservoirs once again viable and more productive. To further explain this essential drilling procedure, Bill Rehm, an experienced legend in drilling along with his co-editors, has compiled a handbook perfect for the drilling supervisor. Underbalanced Drilling: Limits and Extremes, written under the auspices of the IADC Technical Publications Committee, contain many great features and contributions including: Real case studies shared by major service companies to give the reader guidelines on what might happen in actual operations Questions and answers at the end of the chapters for upcoming engineers to test their knowledge Common procedures, typical and special equipment involved, and most importantly, the limits and challenges that still surround this technology

IADC Drilling Manual

IADC Drilling Manual
Author: IADC Staff
Publisher:
Total Pages:
Release: 2014-12-01
Genre:
ISBN: 9780991509508

The IADC Drilling Manual, 12th edition, is the definitive manual for drilling operations, training, maintenance and troubleshooting. The two-volume, 26-chapter reference guide covers all aspects of drilling, with chapters on types of drilling rigs, automation, drill bits, casing and tubing, casing while drilling, cementing, chains and sprockets, directional drilling, downhole tools, drill string, drilling fluid processing, drilling fluids, hydraulics, drilling practices, floating drilling equipment and operations, high-pressure drilling hoses, lubrication, managed pressure drilling and related practices, power generation and distribution, pumps, rotating and pipehandling equipment, special operations, structures and land rig mobilization, well control equipment and procedures, and wire rope. A comprehensive glossary of drilling terms is also included. More than 900 color and black-and-white illustrations, 600 tables and thirteen videos. 1,158 pages. Copyright © IADC. All rights reserved.

Composition and Properties of Drilling and Completion Fluids

Composition and Properties of Drilling and Completion Fluids
Author: Ryen Caenn
Publisher: Gulf Professional Publishing
Total Pages: 721
Release: 2011-09-29
Genre: Technology & Engineering
ISBN: 0123838592

The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. - Explains a myriad of new products and fluid systems - Cover the newest API/SI standards - New R&D on water-based muds - New emphases on Health, Safety & Environment - New Chapter on waste management and disposal

Managed Pressure Drilling

Managed Pressure Drilling
Author: Bill Rehm
Publisher: Elsevier
Total Pages: 400
Release: 2013-12-18
Genre: Science
ISBN: 0127999876

With extraction out of depleted wells more important than ever, this new and developing technology is literally changing drilling engineering for future generations. Never before published in book form, these cutting-edge technologies and the processes that surround them are explained in easy-tounderstand language, complete with worked examples, problems and solutions. This volume is invaluable as a textbook for both the engineering student and the veteran engineer who needs to keep up with changing technology.

The Drilling Manual

The Drilling Manual
Author: Australian Drilling Industry Training Committee Limited
Publisher: CRC Press
Total Pages: 739
Release: 2015-04-01
Genre: Technology & Engineering
ISBN: 143981421X

An Invaluable Reference for Members of the Drilling Industry, from Owner–Operators to Large Contractors, and Anyone Interested In Drilling Developed by one of the world’s leading authorities on drilling technology, the fifth edition of The Drilling Manual draws on industry expertise to provide the latest drilling methods, safety, risk management, and management practices, and protocols. Utilizing state-of-the-art technology and techniques, this edition thoroughly updates the fourth edition and introduces entirely new topics. It includes new coverage on occupational health and safety, adds new sections on coal seam gas, sonic and coil tube drilling, sonic drilling, Dutch cone probing, in hole water or mud hammer drilling, pile top drilling, types of grouting, and improved sections on drilling equipment and maintenance. New sections on drilling applications include underground blast hole drilling, coal seam gas drilling (including well control), trenchless technology and geothermal drilling. It contains heavily illustrated chapters that clearly convey the material. This manual incorporates forward-thinking technology and details good industry practice for the following sectors of the drilling industry: Blast Hole Environmental Foundation/Construction Geotechnical Geothermal Mineral Exploration Mineral Production and Development Oil and Gas: On-shore Seismic Trenchless Technology Water Well The Drilling Manual, Fifth Edition provides you with the most thorough information about the "what," "how," and "why" of drilling. An ideal resource for drilling personnel, hydrologists, environmental engineers, and scientists interested in subsurface conditions, it covers drilling machinery, methods, applications, management, safety, geology, and other related issues.

Applied Three-Dimensional Subsurface Geological Mapping

Applied Three-Dimensional Subsurface Geological Mapping
Author: Daniel J. Tearpock
Publisher: Pearson
Total Pages: 1657
Release: 2020-07-02
Genre: Technology & Engineering
ISBN: 0134859812

The Gold-Standard “Bible” for Applied Subsurface Geological Mapping: Extensively Updated for Working Teams’ Latest Advances Long recognized as the most authoritative, practical, and comprehensive guide to structural mapping methods, Applied Three-Dimensional Subsurface Geological Mapping, Third Edition, has been thoroughly updated to reflect recent technical developments, with an emphasis on shale play basins, horizontal drilling, unconventional resources, and modern workflows. The authors of this edition have more than a century of collective experience in hydrocarbon exploration and development, in major, large, independent companies throughout the world. In this long-awaited update, they present revised and new chapters on computer mapping, shale basin exploration, and prospect reserves and risk. They introduce key innovations related to shale reservoirs, hydraulic fracturing, and deviated, horizontal, and directional wells, along with expanded discussions of computer interpretations and mapping. Throughout, the book links theory and practice based on fundamental geoscience principles. These principles will help you integrate all available geological, geophysical, and engineering data, to generate more reasonable and viable subsurface interpretations, and to construct maps that successfully identify reserves. Master core principles and proven methods for accurate subsurface interpretations and mapping Construct subsurface maps and cross-sections from well logs, seismic sections, and outcrop data Work effectively with horizontal and directionally drilled wells and directional surveys Use powerful well log-correlation techniques Construct viable fault and horizon structure maps Balance and interpret compressional, extensional, and strike-slip structures Distinguish between the different structure styles and the characterization of growth structures Understand isochore and isopach maps This book is indispensable for every integrated working team, consisting of geologists, geophysicists, and engineers, that prepares subsurface geological interpretations and maps, as well as for every manager, executive, and investor who uses or evaluates prospects. Register your book for convenient access to downloads, updates, and/or corrections as they become available. See inside book for details.