Automotive Engine Metrology

Automotive Engine Metrology
Author: Salah H. R. Ali
Publisher: CRC Press
Total Pages: 280
Release: 2017-07-06
Genre: Science
ISBN: 9814669539

In recent decades, metrology—an accurate and precise technology of high quality for automotive engines—has garnered a great deal of scientific interest due to its unique advanced soft engineering techniques in design and diagnostics. Used in a variety of scientific applications, these techniques are now widely regarded as safer, more efficient, and more effective than traditional ones. This book compiles and details the cutting-edge research in science and engineering from the Egyptian Metrology Institute (National Institute for Standards) that is revolutionizing advanced dimensional techniques through the development of coordinate and surface metrology.

Automotive Engine Metrology

Automotive Engine Metrology
Author: Salah H. R. Ali
Publisher: CRC Press
Total Pages: 225
Release: 2017-07-06
Genre: Science
ISBN: 1315341190

In recent decades, metrology—an accurate and precise technology of high quality for automotive engines—has garnered a great deal of scientific interest due to its unique advanced soft engineering techniques in design and diagnostics. Used in a variety of scientific applications, these techniques are now widely regarded as safer, more efficient, and more effective than traditional ones. This book compiles and details the cutting-edge research in science and engineering from the Egyptian Metrology Institute (National Institute for Standards) that is revolutionizing advanced dimensional techniques through the development of coordinate and surface metrology.

Engine Combustion

Engine Combustion
Author: David R Rogers
Publisher: SAE International
Total Pages: 344
Release: 2021-06-02
Genre: Technology & Engineering
ISBN: 1468603205

Engine Combustion: Pressure Measurement and Analysis, 2E provides practical information on measuring, analyzing, and qualifying combustion data, as well as details on hardware and software requirements and system components. Describing the principles of a successful combustion measurement process, the book will enable technicians and engineers to efficiently generate the required data to complete their development tasks. The revised edition has been updated with color photos and a fresh modern format has been adapted enhancing the readability of the book. As with the original printing, Engine Combustion: Pressure Measurement and Analysis, 2E is a comprehensive handbook for technicians and engineers involved in engine testing and development, and a valuable reference for scientists and students who wish to understand combustion measurement processes and techniques.

Advances in Manufacturing II

Advances in Manufacturing II
Author: Magdalena Diering
Publisher: Springer
Total Pages: 313
Release: 2019-05-08
Genre: Technology & Engineering
ISBN: 3030186822

This book gathers timely contributions on metrology and measurement systems, across different disciplines and field of applications. The chapters, which were presented at the 6th International Scientific-Technical Conference, MANUFACTURING 2019, held on May 19-21, 2019, in Poznan, Poland, cover cutting-edge topics in surface metrology, biology, chemistry, civil engineering, food science, material science, mechanical engineering, manufacturing, metrology, nanotechnology, physics, tribology, quality engineering, computer science, among others. By bringing together engineering and economic topics, the book is intended as an extensive, timely and practice-oriented reference guide for both researchers and practitioners. It is also expected to foster better communication and closer cooperation between universities and their business and industry partners.

Advanced Techniques for Assessment Surface Topography

Advanced Techniques for Assessment Surface Topography
Author: Liam Blunt
Publisher: Elsevier
Total Pages: 365
Release: 2003-06-01
Genre: Science
ISBN: 0080526527

This publication deals with the latest developments in the field of 3D surface metrology and will become a seminal text in this important area. It has been prepared with the support of the European Community's Directorate General XII and represents the culmination of research conducted by 11 international partners as part of an EU-funded project. The aim of the project is to inform standards bodies of the possibilities that exist for a new international standard covering the field of 3D surface characterisation.The book covers a description of the proposed 3D surface parameters and advanced filtering techniques using wavelet and robust Gaussian methodologies. The next generation areal surface characterisation theories are discussed and their practical implementation is illustrated. It describes techniques for calibration of 3D instrumentation, including stylus instruments as well as scanning probe instrumentation. Practical verification of the 3D parameters and the filtering is illustrated through a series of case studies which cover bio-implant surfaces, automotive cylinder liner and steel sheet. Finally, future developments of the subject are alluded to and implications for future standardisation and development are discussed.

Air Pollution from Motor Vehicles

Air Pollution from Motor Vehicles
Author: Asif Faiz
Publisher: World Bank Publications
Total Pages: 272
Release: 1996-01-01
Genre: Political Science
ISBN: 9780821334447

Contributions by Surhid Gautam and Lit-Mian Chan. This book presents a state-of-the art review of vehicle emission standards and regulations and provides a synthesis of worldwide experience with vehicle emission control technologies and their applications in both industrial and developing countries. Topics covered include: * The two principal international systems of vehicle emission standards: those of North America and Europe * Test procedures used to verify compliance with emissions standards and to estimate actual emissions * Engine and aftertreatment technologies that have been developed to enable new vehicles to comply with emission standards, as well as the cost and other impacts of these technologies * An evaluation of measures for controlling emissions from in-use vehicles * The role of fuels in reducing vehicle emissions, the benefits that could be gained by reformulating conventional gasoline and diesel fuels, the potential benefits of alternative cleaner fuels, and the prospects for using hydrogen and electric power to run motor vehicles with ultra-low or zero emissions. This book is the first in a series of publications on vehicle-related pollution and control measures prepared by the World Bank in collaboration with the United Nations Environment Programme to underpin the Bank's overall objective of promoting transport that is environmentally sustainable and least damaging to human health and welfare.

Vibrations in Rotating Machinery

Vibrations in Rotating Machinery
Author: IMechE (Institution of Mechanical Engineers)
Publisher: John Wiley & Sons
Total Pages: 750
Release: 2004-10-22
Genre: Technology & Engineering
ISBN: 9781860584473

This essential text contains the papers from the 8th international IMechE conference on Vibrations in Rotating Machinery held at the University of Wales, Swansea in September 2004. The themes of the volume are new developments and industrial applications of current technology relevant to the vibration and noise of rotating machines and assemblies. TOPICS INCLUDE Rotor balancing – including active and automatic balancing Special rotating machines – including micromachines Oil film bearings and dampers Active control methods for rotating machines Smart machine technology Dynamics of assembled rotors Component life predictions and life extension strategies The dynamics of geared systems Cracked rotors – detection, location ad prognosis Chaotic behaviour in machines Experimental methods and discoveries.

A Practical Approach to Motor Vehicle Engineering and Maintenance

A Practical Approach to Motor Vehicle Engineering and Maintenance
Author: Allan Bonnick
Publisher: Routledge
Total Pages: 523
Release: 2011-05-26
Genre: Technology & Engineering
ISBN: 1136270213

Fully updated and in line with latest specifications, this textbook integrates vehicle maintenance procedures, making it the indispensable first classroom and workshop text for all students of motor vehicle engineering, apprentices and keen amateurs. Its clear, logical approach, excellent illustrations and step-by-step development of theory and practice make this an accessible text for students of all abilities. With this book, students have information that they can trust because it is written by an experienced practitioner and lecturer in this area. This book will provide not only the information required to understand automotive engines but also background information that allows readers to put this information into context. The book contains flowcharts, diagnostic case studies, detailed diagrams of how systems operate and overview descriptions of how systems work. All this on top of step-by-step instructions and quick reference tables. Readers won't get bored when working through this book with questions and answers that aid learning and revision included.