Applications of X-ray Computed Tomography in the Geosciences

Applications of X-ray Computed Tomography in the Geosciences
Author: Florias Mees
Publisher: Geological Society of London
Total Pages: 266
Release: 2003
Genre: Medical
ISBN: 9781862391390

X-ray computed tomography (CT) is a technique that allows non-destructive imaging and quantification of internal features of objects. X-ray CT reveals differences in density and atomic composition and can therefore be used for the study of porosity, the relative distribution of contrasting solid phases and the penetration of injected solutions. In this book, various applications of X-ray CT in the geosciences are illustrated by papers covering a wide range of disciplines, including petrology, soil science, petroleum geology, geomechanics and sedimentology.

Xray CT for Geomaterials

Xray CT for Geomaterials
Author: Jun Otani
Publisher: CRC Press
Total Pages: 402
Release: 2004-10-06
Genre: Technology & Engineering
ISBN: 9781439834299

X-ray Computed Tomography (CT) scanning has been widely used for medical diagnosis. This technique is now attracting increasing interest as a tool in non-destructive testing in engineering. This book reports the early results of research into this application, with particular reference to deformation and failure of geomaterials. Presenting papers of the International Workshop on X-CT for Geomaterials at Kumamoto, Japan in 2003. The book is intended for researchers and professionals in the fields of geotechnical engineering, soil, rock and concrete engineering, and geology.

Industrial X-Ray Computed Tomography

Industrial X-Ray Computed Tomography
Author: Simone Carmignato
Publisher: Springer
Total Pages: 372
Release: 2017-10-18
Genre: Technology & Engineering
ISBN: 3319595733

X-ray computed tomography has been used for several decades as a tool for measuring the three-dimensional geometry of the internal organs in medicine. However, in recent years, we have seen a move in manufacturing industries for the use of X-ray computed tomography; first to give qualitative information about the internal geometry and defects in a component, and more recently, as a fully-quantitative technique for dimensional and materials analysis. This trend is primarily due to the ability of X-ray computed tomography to give a high-density and multi-scale representation of both the external and internal geometry of a component, in a non-destructive, non-contact and relatively fast way. But, due to the complexity of X-ray computed tomography, there are remaining metrological issues to solve and the specification standards are still under development. This book will act as a one-stop-shop resource for students and users of X-ray computed tomography in both academia and industry. It presents the fundamental principles of the technique, detailed descriptions of the various components (hardware and software), current developments in calibration and performance verification and a wealth of example applications. The book will also highlight where there is still work to do, in the perspective that X-ray computed tomography will be an essential part of Industry 4.0.

Unsaturated Soils: Research & Applications

Unsaturated Soils: Research & Applications
Author: Adrian R. Russell
Publisher: CRC Press
Total Pages: 1321
Release: 2020-09-24
Genre: Technology & Engineering
ISBN: 1000158152

This book contains the contributions to the Second European Conference on Unsaturated Soils, E-UNSAT 2012, held in Napoli, Italy, in June 2012, and includes more than one hundred papers, addressing three thematic areas: experimental, modelling, and engineering.

Recent Advancements in X-Ray and Neutron Imaging of Dynamic Processes in Earth Sciences

Recent Advancements in X-Ray and Neutron Imaging of Dynamic Processes in Earth Sciences
Author: Lucia Mancini
Publisher: Frontiers Media SA
Total Pages: 162
Release: 2020-12-01
Genre: Science
ISBN: 2889661377

This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.

Cyclic and Fatigue Mechanical Behaviors of Bimrocks

Cyclic and Fatigue Mechanical Behaviors of Bimrocks
Author: Yu Wang
Publisher: Scientific Research Publishing, Inc. USA
Total Pages: 445
Release: 2022-08-31
Genre: Antiques & Collectibles
ISBN: 1649974663

This book is intended as a reference book for advanced graduate students and research engineers in rock mass structural mechanics related to civil engineering, mining, etc. The term of bimrocks (bimsoils, SRM, RSA) is used to describe the mixture of fine particles and larger blocks, such as mélanges, coarse pyroclastic rocks, breccias, colluviums and alluviums, fault rocks, and conglomerates, etc. Bimrock is especially different from the general soil and rock material, and the detection of the damage and fracture is still wide open to innovative research. Globally, there is widespread interest in investigating the geomechanical behaviors of bimrocks, such as deformation and strength characteristics, damage and fracture evolution and stability prediction of bimrock construction. However, the meso-structure factors control the whole mechanical properties of bimrocks, the source of the macroscopic deformation phenomenon is the meso-structural changes. During civil or mining engineering construction, the bimrock is often exposed to complex stress disturbance, such as environmental and human-induced loading acting on rock that is cyclic in nature. Typical forms of stress disturbance include blasting vibration, earthquake, excavation, drilling and vehicle loading, etc. Usually, the stress disturbance condition is inferred as a kind of dynamic loading and differs dramatically from those under static loads. Therefore, evaluation of the mesoscopic physical and mechanical properties, together with advanced testing technique, is attractive research topics in its fatigue mechanics. As a result, comprehensive macroscopic and mesoscopic experimental investigations should be conducted to reveal the damage and fracturing mechanical behaviors of bimrock exposed to cyclic and fatigue loads.

Geological and Soil Evidence

Geological and Soil Evidence
Author: Kenneth Pye
Publisher: CRC Press
Total Pages: 362
Release: 2007-04-19
Genre: Law
ISBN: 1420004751

The forensic potential of geological and soil evidence has been recognized for more than a century, but recently these types of evidence are used much more widely as an investigative intelligence tool and as evidence in court. There is, however, still a poor understanding of the potential value and the limitations of geological and soil evidence am

Computer and Computing Technologies in Agriculture XI

Computer and Computing Technologies in Agriculture XI
Author: Daoliang Li
Publisher: Springer
Total Pages: 578
Release: 2019-01-09
Genre: Computers
ISBN: 303006137X

The two volumes IFIP AICT 545 and 546 constitute the refereed post-conference proceedings of the 11th IFIP WG 5.14 International Conference on Computer and Computing Technologies in Agriculture, CCTA 2017, held in Jilin, China, in August 2017. The 100 revised papers included in the two volumes were carefully reviewed and selected from 282 submissions. They cover a wide range of interesting theories and applications of information technology in agriculture. The papers focus on four topics: Internet of Things and big data in agriculture, precision agriculture and agricultural robots, agricultural information services, and animal and plant phenotyping for agriculture.

Proxies in Late Cenozoic Paleoceanography

Proxies in Late Cenozoic Paleoceanography
Author: C. Hillaire-Marcel
Publisher: Elsevier
Total Pages: 863
Release: 2007-05-25
Genre: Science
ISBN: 0080525040

The present volume is the first in a series of two books dedicated to the paleoceanography of the Late Cenozoic ocean. The need for an updated synthesis on paleoceanographic science is urgent, owing to the huge and very diversified progress made in this domain during the last decade. In addition, no comprehensive monography still exists in this domain. This is quite incomprehensible in view of the contribution of paleoceanographic research to our present understanding of the dynamics of the climate-ocean system. The focus on the Late Cenozoic ocean responds to two constraints. Firstly, most quantitative methods, notably those based on micropaleontological approaches, cannot be used back in time beyond a few million years at most. Secondly, the last few million years, with their strong climate oscillations, show specific high frequency changes of the ocean with a relatively reduced influcence of tectonics. The first volume addresses quantitative methodologies to reconstruct the dynamics of the ocean andthe second, major aspects of the ocean system (thermohaline circulation, carbon cycle, productivity, sea level etc.) and will also present regional synthesis about the paleoceanography of major the oceanic basins. In both cases, the focus is the "open ocean leaving aside nearshore processes that depend too much onlocal conditions. In this first volume, we have gathered up-to-date methodologies for the measurement and quantitative interpretation of tracers and proxies in deep sea sediments that allow reconstruction of a few key past-properties of the ocean( temperature, salinity, sea-ice cover, seasonal gradients, pH, ventilation, oceanic currents, thermohaline circulation, and paleoproductivity). Chapters encompass physical methods (conventional grain-size studies, tomodensitometry, magnetic and mineralogical properties), most current biological proxies (planktic and benthic foraminifers, deep sea corals, diatoms, coccoliths, dinocysts and biomarkers) and key geochemical tracers (trace elements, stable isotopes, radiogenic isotopes, and U-series). Contributors to the book and members of the review panel are among the best scientists in their specialty. They represent major European and North American laboratories and thus provide a priori guarantees to the quality and updat of the entire book. Scientists and graduate students in paleoclimatology, paleoceanography, climate modeling, and undergraduate and graduate students in marine geology represent the target audience. This volume should be of interest for scientists involved in several international programs, such as those linked to the IPCC (IODP – Integrated Ocean Drilling Program; PAGES – Past Global Changes; IMAGES – Marine Global Changes; PMIP: Paleoclimate Intercomparison Project; several IGCP projects etc.), That is, all programs that require access to time series illustrating changes in the climate-ocean system. - Presents updated techniques and methods in paleoceanography - Reviews the state-of-the-art interpretation of proxies used for quantitative reconstruction of the climate-ocean system - Acts as a supplement for undergraduate and graduate courses in paleoceanography and marine geology

Advances in the Characterization of Industrial Minerals

Advances in the Characterization of Industrial Minerals
Author: G.E. Christidis
Publisher: The Mineralogical Society of Great Britain and Ireland
Total Pages: 508
Release: 2011-08-31
Genre: Science
ISBN: 0903056283

The advancement of human civilization has been intimately associated with the exploitation of raw materials. In fact the distinction of the main historical eras is based on the type of raw materials used. Hence, passage from the Paleolithic and Neolithic Age to the Bronze Age is characterized by the introduction of basic metals mainly copper, zinc and tin in human activities; the Iron Age is marked by the use of iron as the predominant metal. The use of metals has increased and culminated with the industrial revolution in the mid-eighteenth century, which marked the onset of the industrial age in the western world. Since then the importance of metals has gradually been surpassed by industrial minerals in the industrialized countries. Industrial minerals are raw materials used by industry for their physical and/or chemical properties. Characterization of industrial minerals is important for their assessment and can be demanding and often complicated. This new volume, co-published by the European Mineralogical Union and the Mineralogical Society of Great Britain & Ireland, is based on papers presented at an EMU-Erasmus IP School which was held in the Technical University of Crete, Chania, Greece. The aim of the School was to describe advances in some of the analytical methods used to characterize industrial minerals and to propose additional methods which are currently not used for this purpose.