Micro Irrigation Engineering for Horticultural Crops

Micro Irrigation Engineering for Horticultural Crops
Author: Megh R. Goyal
Publisher: CRC Press
Total Pages: 259
Release: 2017-09-07
Genre: Science
ISBN: 1351800248

This book presents a variety of policy adoption methods, irrigation scheduling, and design procedures in micro irrigation engineering for horticultural crops. The chapters range from policy interventions to applications of systems for different crops and under different land conditions. Compiling valuable information and research, the book is divided into three main sections: Policy Options: Drip Irrigation Among Adopters Irrigation Scheduling of Horticultural Crops Design of Drip Irrigation Systems The editors present valuable research and information on micro irrigation methods in an effort to focus on innovation and evolving new paradigms for efficient utilization of water resources. The adoption of micro irrigation systems can be a panacea for irrigation related problems and can help to increase the yield and area under cultivation, especially for small farmers without abundant technological resources. Micro Irrigation Engineering for Horticultural Crops: Policy Options, Scheduling, and Design will be valuable for agricultural engineering students, irrigation engineers, and scientists/professors in engineering.

Farm Irrigation

Farm Irrigation
Author: Neil Southorn
Publisher: Butterworth-Heinemann
Total Pages: 164
Release: 1997-01-01
Genre: Technology & Engineering
ISBN: 9780750689373

There is no doubt that irrigation makes a major contribution to agricultural production, making a whole range of crops viable in an otherwise unreliable climate and helping insure against drought. However irrigation does not automatically guarantee a profit and acclaim, it is a high cost exercise, using water from increasingly scarce supplies, and contributes to environmental concerns of the community. Many of the pressures facing some irrigators have been caused by a lack of understanding in the past of best practices necessary in design, installation and management. Alternative methods of irrigation are presented, emphasising the characteristics of each that may make them suitable (or unsuitable) for particular situations. The range of crops under irrigation is very wide, and so too is the range of methods available to get water to them. Horticultural crops are included as well as broadacre crops. This section is followed by technical information of the various components that make up an irrigation system, and their installation. Irrigation is concerned with providing the optimum soil moisture conditions for plant growth. So to is drainage, in that too much water in the soil will retard growth. Many of the concepts surrounding irrigation are applicable to a consideration of drainage, so the book discusses that technology as well.

Irrigation Fundamentals

Irrigation Fundamentals
Author: George H. Hargreaves
Publisher: Water Resources Publication
Total Pages: 202
Release: 1998
Genre: Technology & Engineering
ISBN: 9781887201100

IRRIGATION FUNDAMENTALS is a comprehensive text on the basic principles and practices of applied agricultural irrigation. Written over a period of more than 10 years, it is based on the authors'' extensive experience in farming, consulting, research, teaching, and other related agricultural activities. The book is for use by teachers of introductory courses in irrigation, farmers who have some basic technical knowledge, and for administrators who need a general understanding of irrigation as an aid for policy decisions in water resource development and planning. Various factors that influence crop yield and production including climate, fertility, water, drainage, and agronomic practices are addressed. The various irrigation methods such as border, basin, contour, furrow, sub, sprinkle, and drip or trickle are described; and conditions are given for selection of the appropriate method to use. Recent developments and new technology are included herein when they have obvious practical applications, but for the most part the material presented in this book is based on well established principles and practices. Much of the content is very practical and much is essentially nontechnical. Nevertheless, some of the material covered in this book goes beyond the basic concepts in an attempt to better describe the relationships and techniques employed by irrigation scientists and irrigation engineers.From the Preface: The future of the world depends very much on how we manage natural resources. Since the year 1900 there has been a ninefold increase in global carbon emissions from burning fossil fuels, and the world population has increased about 3.7 times in this century. Vast areas of forests have been destroyed, and irrigated lands now produce 40% of the food supply. Due to depletion of groundwater reserves and an increase in population, irrigated area per capita is declining. Consequently, the irrigation of additional alluvial lands is a strategic necessity for all of humankind. Much of the alluvial lands cannot be made productive without prior development of water resources through flood control, drainage, and irrigation. The production of electricity through hydropower and the production of alcohol fuel from irrigated crops, as has been practiced for many years in Brazil, can slow the increase in carbon emissions. Such diverse developments are typically not separable; rather, they must be considered as integral parts of a comprehensive development plan. The conservation of natural resources and increasing productivity of irrigated lands are also strategic necessities. Much of the current technology is highly transferable and crop yields can be significantly increased on lands already under irrigation.The authors have worked in many countries in connection with resource inventories, teaching, and the planning, development and use of irrigation as a tool for increasing production and providing employment. They have written extensively and have been honored for their achievements. They have considerable experience with everything from primitive low-technology irrigation developments to highly developed irrigation in the USA and in dozens of countries around the world. Both of the authors have dedicated their careers to teaching, research, and consulting in agricultural irrigation and water resources development and planning. It is their hope and expectation that this book will provide incentives for investigating and documenting land and water resources, improving development, increasing crop yields, conserving resources, and improving the environment. From the Table of Contents:Chapt. 1 - INTRODUCTION: Irrigation Fundamentals: - - A Definition of Irrigation - - Statistical Perspectives of Agricultural IrrigationChapt. 2 - FACTORS INFLUENCING CROP PRODUCTION: - - Introduction - - Temperature, Radiation, and Evaporative Potential - - Climate Change - - Soil Fertility and Fertilizers - - Water Availability and Distribution - - Soil Aeration and Drainage - - Plant Density, Spacing and Leaf Area Index - - Crop VarietyChapt. 3 - AGRICULTURAL SOILS: - - Introduction - - Soil Texture and Structure - - Soil Classification and Evaluation - - Bureau of Reclamation Land Classification - - Soil Age and Topography - - Soil Chemistry - - Infiltration Rates - - Soil-Water Relationships - - Equations for Soil Water Content - - Soil Water Potential - - Measuring Soil Water ContentChapt. 4 - EVALUATING IRRIGATION RESOURCES: - - Introduction - - Climate - - Hydrology - - Human and Other Factors - - Integrated DevelopmentChapt. 5 - IRRIGATION METHODS: - - Introduction - - Graded Border Irrigation - - Basin Irrigation - - Contour Levees - - Furrow Irrigation - - Sub-Irrigation - - Sprinkle Irrigation - - Drip or Trickle Irrigation - - Selecting an Irrigation Method - - Land Grading and Leveling - - Laser-Leveling Equipment and Practices - - Computing Diagonal Slopes - - Irrigation System EvaluationChapt. 6 - CROP WATER REQUIREMENTS: - - Introduction - - Direct Methods - - Indirect Methods - - Potential Evaporation - - Reference Evapotranspiration - - Extraterrestrial Solar Radiation - - Irrigation Requirements - - Crop CoefficientsChapt. 7 - IRRIGATION SCHEDULING: - - Introduction - - Allowable Water Depletion - - Monitoring Soil Water - - Scheduling Irrigations - - Rice Irrigation

Trickle Irrigation for Crop Production

Trickle Irrigation for Crop Production
Author: F.S. Nakayama
Publisher: Elsevier
Total Pages: 394
Release: 2012-12-02
Genre: Technology & Engineering
ISBN: 0444600965

An entirely new agricultural technology, trickle or drip irrigation, began its development in the early 1960's. Initial progress was sporadic even though the advantages in water management with trickle systems were recognized. Operators were reluctant to use the system because of its high initial cost and questions regarding its reliability. Once the main problems were isolated and solutions developed to make the system reliable, rapid acceptance by the growers resulted. Today, trickle irrigation is being used on crops that were earlier considered to be uneconomical. This multi-purpose handbook brings together current knowledge from various engineering and scientific disciplines (crop, hydraulic, irrigation and soil sciences) needed for understanding the trickle irrigation system for crop production. The two dozen contributors are experts on the various subjects, which range from the basic to the more practical aspects of trickle irrigation. Major topics include design, operation and management - with individual chapters covering historical development, emitter construction and clogging, system design, water and salt distribution, automation, water treatment, irrigation scheduling, maintenance, fertilization and salinity.The book greatly expands the scope of research papers, reviews, extension bulletins, and updates earlier text with new information on trickle systems. A multi-disciplinary approach has been taken on a multi-faceted subject. The material contained in the book is the most comprehensive yet developed on the topic. Illustrative sample problems and solutions provide field operators and extension personnel with information needed to install and maintain trickle systems. As it is up-to-date, it is useful as a teaching and reference source for students, manufacturers and irrigation system operators as well as irrigation and crop specialists, and consultants.