An Introduction to Construction of Tunnels and Shafts for Professional Engineers

An Introduction to Construction of Tunnels and Shafts for Professional Engineers
Author: J. Paul Guyer, P.E., R.A.
Publisher: Guyer Partners
Total Pages: 134
Release: 2022-06-09
Genre: Technology & Engineering
ISBN:

Introductory technical guidance for civil engineers, geotechnical engineers and construction managers interested in construction of tunnels and shafts. Here is what is discussed: 1. GENERAL, 2. TUNNEL EXCAVATION BY DRILLING AND BLASTING, 3. TUNNEL EXCAVATION BY MECHANICAL MEANS, 4. INITIAL GROUND SUPPORT, 5. SEQUENTIAL EXCAVATION AND SUPPORT, 6. PORTAL CONSTRUCTION, 7. SHAFT CONSTRUCTION, 8. OPTIONS FOR GROUND IMPROVEMENT, 9. DRAINAGE AND CONTROL OF GROUNDWATER, 10. CONSTRUCTION OF FINAL, PERMANENT TUNNEL LININGS, 11. VENTILATION OF TUNNELS AND SHAFTS, 12. SURVEYING FOR TUNNELS AND SHAFTS, 13. CONSTRUCTION HAZARDS AND SAFETY REQUIREMENTS, 14. ENVIRONMENTAL CONSIDERATIONS AND EFFECTS, 15. CONTRACTING PRACTICES, 16. PRACTICAL CONSIDERATIONS FOR THE PLANNING OF TUNNEL PROJECTS.

An Introduction to Tunnels and Shafts for Professional Engineers

An Introduction to Tunnels and Shafts for Professional Engineers
Author: J. Paul Guyer, P.E., R.A.
Publisher: Guyer Partners
Total Pages: 406
Release: 2024-01-09
Genre: Technology & Engineering
ISBN:

Introductory technical guidance for civil engineers, geotechnical engineers and other professional engineers nd construction managers interested in design and construction of tunnels and shafts in rock and soil. Here is what is discussed: 1. CONSTRUCTION BY BLASTING AND BORING, 2. DESIGN CONSIDERATIONS, 3. GEOTECHNICAL ANALYSIS, 4. INITIAL GROUND SUPPORT DESIGN, 5. CONSTRUCTION OF TUNNELS AND SHAFTS, 6. GEOTECHNICAL EXPLORATION, 7. GROUND SUPPORT, 8. TUNNELS AND SHAFTS IN ROCK.

An Introduction to Tunnels and Shafts in Rock for Professional Engineers

An Introduction to Tunnels and Shafts in Rock for Professional Engineers
Author: J. Paul Guyer, P.E., R.A.
Publisher: Guyer Partners
Total Pages: 68
Release: 2023-08-06
Genre: Technology & Engineering
ISBN:

Introductory technical guidance for civil engineers, geotechnical engineers and other professional engineers and construction managers interested in design and construction of tunnels and shafts in rock. Here is what is discussed: 1. FUNDAMENTAL APPROACH TO GROUND SUPPORT DESIGN, 2. FUNCTIONAL REQUIREMENTS OF TUNNELS AND SHAFTS, 3. MODES OF FAILURE OF TUNNELS AND SHAFTS, 4. SEISMIC EFFECTS ON TUNNELS.

AUA Guidelines for Backfilling and Contact Grouting of Tunnels and Shafts

AUA Guidelines for Backfilling and Contact Grouting of Tunnels and Shafts
Author: Raymond W. Henn
Publisher: Thomas Telford
Total Pages: 274
Release: 2003
Genre: House & Home
ISBN: 9780727729835

- Introduction - Affects of geological conditions of grouting - Structural and operations requirements of the completed facility - Grouting of various lining types - Grout materials - Grout properties - Backfill grouting - Contact grouting - Grouting equipment - Record keeping - Quality control - Contract documents

Tunnel Engineering Handbook

Tunnel Engineering Handbook
Author: Thomas R. Kuesel
Publisher: Springer Science & Business Media
Total Pages: 559
Release: 2012-12-06
Genre: Technology & Engineering
ISBN: 1461304490

The Tunnel Engineering Handbook, Second Edition provides, in a single convenient volume, comprehensive coverage of the state of the art in the design, construction, and rehabilitation of tunnels. It brings together essential information on all the principal classifications of tunnels, including soft ground, hard rock, immersed tube and cut-and-cover, with comparisons of their relative advantages and suitability. The broad coverage found in the Tunnel Engineering Handbook enables engineers to address such critical questions as how tunnels are planned and laid out, how the design of tunnels depends on site and ground conditions, and which types of tunnels and construction methods are best suited to different conditions. Written by the leading engineers in the fields, this second edition features major revisions from the first, including: * Complete updating of all chapters from the first edition * Seven completely new chapters covering tunnel stabilization and lining, difficult ground, deep shafts, water conveyance tunnels, small diameter tunnels, fire life safety, tunnel rehabilitation and tunnel construction contracting *New coverage of the modern philosophy and techniques of tunnel design and tunnel construction contracting The comprehensive coverage of the Tunnel Engineering Handbook makes it an essential resource for all practicing engineers engaged in the design of tunnels and underground construction. In addition, the book contains a wealth of information that government administrators and planners and transportation officials will use in the planning and management of tunnels.

An Introduction to Dewatering Systems Planning for Professional Engineers

An Introduction to Dewatering Systems Planning for Professional Engineers
Author: J. Paul Guyer, P.E., R.A.
Publisher: Guyer Partners
Total Pages: 45
Release: 2022-10-07
Genre: Technology & Engineering
ISBN:

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in dewatering systems for construction sites and other applications. Here is what is discussed: 1. INTRODUCTION, 2. METHODS FOR DEWATERING, PRESSURE RELIEF AND SEEPAGE CUTOFF, 3. GEOLOGIC, SOIL, AND GROUNDWATER INVESTIGATIONS.

Shield Construction Techniques in Tunneling

Shield Construction Techniques in Tunneling
Author: Kui Chen
Publisher: Woodhead Publishing
Total Pages: 590
Release: 2021-02-05
Genre: Architecture
ISBN: 0128201282

Shield Construction Techniques in Tunnelling presents the latest on this fast, environmentally-friendly and relatively safe construction technique, reflecting on its technical risks and challenges as seen in China. Sections introduce the type of shields, the history of the technique, shielding principles, selection, management, the latest techniques in operation, consider engineering cases, discuss construction in gravel, soft-soil, composite, and rock strata, and present video clips of construction that are accessible through QR codes embedded in the text. The book combines theory and practical experience, giving the reader unique insights into shield equipment and construction techniques. The shield tunneling technique is being used very widely, particularly in China, which is building urban-rail transit systems at an unparalleled scale and speed. The use of tunneling-shields provides a fast, relatively-safe, and ecologically-friendly method for the construction of tunnels. However, a number of incidents have shown the risks involved in tunnelling through geologically complex areas. - Gives the principles and practice of shield construction techniques, including shield selection and operation - Demonstrates the latest technologies in shield construction that can be applied in practice - Reflects on the technical risks and challenges of shield construction, based on extensive use of the technique for tunnel construction in China - Discusses challenges in construction in gravel, soft-soil, composite and rock strata - Provides engineers with applicable insights into shield equipment and construction techniques

Design of Underground Structures

Design of Underground Structures
Author: Zhen-Dong Cui
Publisher: Springer
Total Pages: 880
Release: 2019-08-09
Genre: Technology & Engineering
ISBN: 9811377324

This book provides a general review of the literature on underground structures, combined with new specifications, engineering case studies, and numerical simulations based on the authors’ research. It focuses on the basic concepts, theories, and methods of the design of underground structures. After an introduction, it covers various topics, such as elastic foundation beam theory and numerical analysis methods for underground structures, as well as the design of shallow underground structures, diaphragm wall structures, shield tunnel structures, caisson structures, immersed tube structures, and integral tunnel structures. It also includes tables for calculating elastic foundation beam. This book is intended for senior undergraduate and graduate students majoring in urban underground space engineering, building engineering, highway engineering, railway engineering, bridge and tunnel engineering, water conservancy and hydropower engineering.

Groundwater Lowering in Construction

Groundwater Lowering in Construction
Author: Pat M. Cashman
Publisher: CRC Press
Total Pages: 881
Release: 2020-08-10
Genre: Technology & Engineering
ISBN: 1000080749

Praise for the Second Edition: "This is the book that the dewatering sector really needs – it is reliably based on sound theory and profound understanding of the physical processes, yet is presented in a very accessible and user-friendly manner. It draws on many, many decades of experience, and yet is utterly up to date. . . . It is a one-stop shop for the dewatering practitioner – who can nonetheless rest assured that the theoretical basis of the methods presented is flawless." — Professor Paul L. Younger, FGS, FICE, C.Geol., C.Eng., FREng, University of Glasgow, Scotland, UK "The best reference on this topic available . . . and will prove useful to a wide variety of readers ranging from junior construction engineers or dewatering contractors to theoretical hydrogeologists and environmental managers. It is rare that a book is able to bridge the gap between theoretical design guidance and practical application." — S.N. Sterling, University of Waterloo, Canada The extensively updated Groundwater Lowering in Construction: A Practical Guide to Dewatering, 3rd Edition offers practical advice on all phases of groundwater control systems, from planning and design, through installation and maintenance, and ultimately decommissioning. The expertise provided in this book can help you improve working conditions, increase project viability, save time and reduce excavation costs. Designers and managers of construction and engineering projects are given the tools necessary to effectively control groundwater. The content is divided into three sections – Principles, Design and Construction. The Principles section explains the fundamentals of groundwater flow as it relates to civil engineering excavations. The Design section explores in extensive detail site investigation, permeability assessment methods and groundwater control strategies. Chapters in the Construction section describe dewatering and exclusion techniques, and examine the complete life cycle of a groundwater control scheme, including monitoring, maintenance and decommissioning. This section incorporates eleven case histories from the authors’ casebook. The 3rd edition has been greatly revised and updated, and contains more than 200 new illustrations. The new content covers: Permeability of soils and rocks Groundwater problems for excavations in rock Groundwater control for tunnelling projects, such as shafts and cross passages Methods for assessing permeability Decommissioning of dewatering systems Optimisation of groundwater control schemes. The new, expanded content offers valuable direction that can give you a true competitive advantage in the planning and execution of temporary and permanent dewatering works for excavation and tunnelling. Written for practising engineers, geologists and construction managers, as well as postgraduate engineering students, this revamped manual on design and practice presents numerous case studies and extensive references to enhance understanding. Martin Preene is a groundwater consultant, based in the UK. He has more than 30 years’ experience working on dewatering and groundwater control projects worldwide. The late Pat Cashman was the leading British exponent of groundwater control for his generation, championing a practical and straightforward approach for more than forty years.