An Introduction To Bioreactor Hydrodynamics And Gas Liquid Mass Transfer
Download An Introduction To Bioreactor Hydrodynamics And Gas Liquid Mass Transfer full books in PDF, epub, and Kindle. Read online free An Introduction To Bioreactor Hydrodynamics And Gas Liquid Mass Transfer ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Author | : Enes Kadic |
Publisher | : John Wiley & Sons |
Total Pages | : 330 |
Release | : 2014-03-14 |
Genre | : Science |
ISBN | : 1118869834 |
Reviews and compares the major types of bioreactors, defines their pros and cons, and identifies research needs and figures of merit that have yet to be addressed Describes common modes of operation in bioreactors Covers the three common bioreactor types, including stirred-tank bioreactors, bubble column bioreactors, and airlift bioreactors Details less common bioreactors types, including fixed bed bioreactors and novel bioreactor designs Discusses advantages and disadvantages of each bioreactor and provides a procedure for optimal bioreactor selection based on current process needs Reviews the problems of bioreactor selection globally while considering all bioreactor options rather than concentrating on one specific bioreactor type
Author | : M. Y. Chisti |
Publisher | : |
Total Pages | : 323 |
Release | : 1988 |
Genre | : |
ISBN | : |
Author | : Caroline Leguay |
Publisher | : |
Total Pages | : |
Release | : 2001 |
Genre | : |
ISBN | : |
Author | : Barry Azzopardi |
Publisher | : John Wiley & Sons |
Total Pages | : 317 |
Release | : 2011-05-12 |
Genre | : Technology & Engineering |
ISBN | : 1119971403 |
The design of chemical reactors and their safety are as critical to the success of a chemical process as the actual chemistry taking place within the reactor. This book provides a comprehensive overview of the practical aspects of multiphase reactor design and operation with an emphasis on safety and clean technology. It considers not only standard operation conditions, but also the problems of runaway reaction conditions and protection against ensuing over-pressure. Hydrodynamics of Multiphase Reactors addresses both practical and theoretical aspects of this topic. Initial chapters discuss various different types of gas/liquid reactors from a practical viewpoint, and later chapters focus on the modelling of multiphase systems and computational methods for reactor design and problem solving. The material is written by experts in their specific fields and will include chapters on the following topics: Multiphase flow, Bubble columns, Sparged stirred vessels, Macroscale modelling, Microscale modelling, Runaway conditions, Behaviour of vessel contents, Choked flow, Measurement techniques.
Author | : Enes Kadic |
Publisher | : |
Total Pages | : 306 |
Release | : 2010 |
Genre | : |
ISBN | : |
Author | : Jerome Morchain |
Publisher | : Elsevier |
Total Pages | : 220 |
Release | : 2017-10-06 |
Genre | : Technology & Engineering |
ISBN | : 0081011660 |
Dynamic simulation of bioreactors is a challenge for both the industrial and academic worlds. Beyond the large number of physical and biological phenomena to be considered and the wide range of scales involved, the central difficulty lies in the need to account for the dynamic behavior of suspended microorganisms. In the case of chemical reactors, knowledge of the thermodynamic equilibrium laws at the interfaces makes it possible to produce macroscopic models by integrating local laws. Microorganisms, on the other hand, have the ability to modulate the rate of substrate assimilation. Moreover, the nature of the biochemical transformations results from a compromise between the needs of the cell and the available resources. This book revisits the modeling of bioreactors using a multi-scale approach. It addresses issues related to mixing, phase-to-phase transfers and the adaptation of microorganisms to variations in concentration, and explores the use of population balances for the simulation of bioreactors. By adopting a multidisciplinary perspective that draws on process engineering, fluid mechanics and microbiology, this book sheds new light on the particularity of bioprocesses in relation to physical and chemical phenomena. Presents a multiphase description of bioreactor modeling Includes a combination of concepts issued from different scientific fields to address a practical issue Provides a detailed description of the population balance concept as applied to biological systems Covers a set of illustrative examples of the interaction between hydrodynamics and biological response
Author | : Yi-Tong Wang |
Publisher | : MDPI |
Total Pages | : 208 |
Release | : 2020-11-13 |
Genre | : Technology & Engineering |
ISBN | : 3039363123 |
Biomass is the only renewable carbon source that can be converted into high value-added carbon products. This book presents a collection of studies on the conversion of catalytic biomass to renewable biofuels and biomaterials by chemical conversion, co-combustion technology, and biological conversion technology. The fundamentals and mechanisms of catalytic materials design, process optimization, product development, and by-product utilization are outlined. All articles were contributed by experts in catalysis and bioenergy fields to provide readers with a broad range of perspectives on cutting-edge applications. This book is an ideal reference guide for academic researchers and engineering technicians in the fields of catalytic material synthesis, biomass energy conversion, enzyme catalysis, pyrolysis, combustion, vaporization, and fermentation. It can also be used as a comprehensive reference source for university students in renewable energy science and engineering, agricultural engineering, thermal engineering, chemical engineering, material science, and environmental engineering. This book contains 12 articles: (1) “Catalytic Biomass to Renewable Biofuels and Biomaterials”; (2) “Experimental Design to Improve Cell Growth and Ethanol Production in Syngas Fermentation by Clostridium carboxidivorans”; (3) “Glycerol Acetylation Mediated by Thermally Hydrolysed Biosolids-Based Material”; (4) “Influence of Base-Catalyzed Organosolv Fractionation of Larch Wood Sawdust on Fraction Yields and Lignin Properties”; (5) “Ca-based Catalysts for the Production of High-Quality Bio-Oils from the Catalytic Co-Pyrolysis of Grape Seeds and Waste Tyres”; (6) “Synthesis of Diesel and Jet Fuel Range Cycloalkanes with Cyclopentanone and Furfural”; (7) “Gel-Type and Macroporous Cross-Linked Copolymers Functionalized with Acid Groups for the Hydrolysis of Wheat Straw Pretreated with an Ionic Liquid”; (8) “Role of Humic Acid Chemical Structure Derived from Different Biomass Feedstocks on Fe(III) Bioreduction Activity: Implication for Sustainable Use of Bioresources”; (9) “Selective Production of Terephthalonitrile and Benzonitrile via Pyrolysis of Polyethylene Terephthalate (PET) with Ammonia over Ca(OH)2/Al2O3 Catalysts”; (10) “Experimental Studies on Co-Combustion of Sludge and Wheat Straw”; (11) “Carbonate-Catalyzed Room-Temperature Selective Reduction of Biomass-Derived 5-Hydroxymethylfurfural into 2,5-Bis(hydroxymethyl)furan”; (12) “Clostridium sp. as Bio-Catalyst for Fuels and Chemicals Production in a Biorefinery Context”.
Author | : Angelo Basile |
Publisher | : Elsevier |
Total Pages | : 654 |
Release | : 2019-03-23 |
Genre | : Technology & Engineering |
ISBN | : 0081026560 |
Second and Third Generation of Feedstocks: The Evolution of Biofuels presents a critical analysis of both the applications and potential of bioenergy production from second and third generation feedstocks. The book illustrates different aspects of the processes used for the production of biofuels, dealing specifically with second and third generation feedstocks from biomass and algae. The pretreatment of feedstocks and optimization of various forms of bioenergy are considered, along with the economic aspects of the various processes. In the last few years, industrial research efforts have focused on low cost, large-scale processing for lignocellulosic feedstocks originating from agricultural residues and municipal wastes for bioenergy production. This book shares an insight into the recent developments taking place in this industry, exploring transformation processes as well as biomass and algae conversions. Reviews existing lignocellulosic biomass feedstocks and their sources Includes processes for the conversion of various feedstocks to biofuels Discusses current research findings on second and third generation feedstocks Describes processes involved in the transformation of algal biomass into biofuels
Author | : Vincenzo Piemonte |
Publisher | : John Wiley & Sons |
Total Pages | : 273 |
Release | : 2018-04-23 |
Genre | : Science |
ISBN | : 1119296048 |
An important resource that puts the focus on the chemical engineering aspects of biomedical engineering In the past 50 years remarkable achievements have been advanced in the fields of biomedical and chemical engineering. With contributions from leading chemical engineers, Biomedical Engineering Challenges reviews the recent research and discovery that sits at the interface of engineering and biology. The authors explore the principles and practices that are applied to the ever-expanding array of such new areas as gene-therapy delivery, biosensor design, and the development of improved therapeutic compounds, imaging agents, and drug delivery vehicles. Filled with illustrative case studies, this important resource examines such important work as methods of growing human cells and tissues outside the body in order to repair or replace damaged tissues. In addition, the text covers a range of topics including the challenges faced with developing artificial lungs, kidneys, and livers; advances in 3D cell culture systems; and chemical reaction methodologies for biomedical imagining analysis. This vital resource: Covers interdisciplinary research at the interface between chemical engineering, biology, and chemistry Provides a series of valuable case studies describing current themes in biomedical engineering Explores chemical engineering principles such as mass transfer, bioreactor technologies as applied to problems such as cell culture, tissue engineering, and biomedical imaging Written from the point of view of chemical engineers, this authoritative guide offers a broad-ranging but concise overview of research at the interface of chemical engineering and biology.
Author | : Roger King |
Publisher | : |
Total Pages | : 460 |
Release | : 1988 |
Genre | : Science |
ISBN | : |