Responding to Oil Spills in the U.S. Arctic Marine Environment

Responding to Oil Spills in the U.S. Arctic Marine Environment
Author: National Research Council
Publisher: National Academies Press
Total Pages: 350
Release: 2014-08-01
Genre: Science
ISBN: 030929889X

U.S. Arctic waters north of the Bering Strait and west of the Canadian border encompass a vast area that is usually ice covered for much of the year, but is increasingly experiencing longer periods and larger areas of open water due to climate change. Sparsely inhabited with a wide variety of ecosystems found nowhere else, this region is vulnerable to damage from human activities. As oil and gas, shipping, and tourism activities increase, the possibilities of an oil spill also increase. How can we best prepare to respond to such an event in this challenging environment? Responding to Oil Spills in the U.S. Arctic Marine Environment reviews the current state of the science regarding oil spill response and environmental assessment in the Arctic region north of the Bering Strait, with emphasis on the potential impacts in U.S. waters. This report describes the unique ecosystems and environment of the Arctic and makes recommendations to provide an effective response effort in these challenging conditions. According to Responding to Oil Spills in the U.S. Arctic Marine Environment, a full range of proven oil spill response technologies is needed in order to minimize the impacts on people and sensitive ecosystems. This report identifies key oil spill research priorities, critical data and monitoring needs, mitigation strategies, and important operational and logistical issues. The Arctic acts as an integrating, regulating, and mediating component of the physical, atmospheric and cryospheric systems that govern life on Earth. Not only does the Arctic serve as regulator of many of the Earth's large-scale systems and processes, but it is also an area where choices made have substantial impact on life and choices everywhere on planet Earth. This report's recommendations will assist environmentalists, industry, state and local policymakers, and anyone interested in the future of this special region to preserve and protect it from damaging oil spills.

The Use of Dispersants in Marine Oil Spill Response

The Use of Dispersants in Marine Oil Spill Response
Author: National Academies of Sciences, Engineering, and Medicine
Publisher: National Academies Press
Total Pages: 341
Release: 2020-04-24
Genre: Nature
ISBN: 0309478219

Whether the result of an oil well blowout, vessel collision or grounding, leaking pipeline, or other incident at sea, each marine oil spill will present unique circumstances and challenges. The oil type and properties, location, time of year, duration of spill, water depth, environmental conditions, affected biomes, potential human community impact, and available resources may vary significantly. Also, each spill may be governed by policy guidelines, such as those set forth in the National Response Plan, Regional Response Plans, or Area Contingency Plans. To respond effectively to the specific conditions presented during an oil spill, spill responders have used a variety of response optionsâ€"including mechanical recovery of oil using skimmers and booms, in situ burning of oil, monitored natural attenuation of oil, and dispersion of oil by chemical dispersants. Because each response method has advantages and disadvantages, it is important to understand specific scenarios where a net benefit may be achieved by using a particular tool or combination of tools. This report builds on two previous National Research Council reports on dispersant use to provide a current understanding of the state of science and to inform future marine oil spill response operations. The response to the 2010 Deepwater Horizon spill included an unprecedented use of dispersants via both surface application and subsea injection. The magnitude of the spill stimulated interest and funding for research on oil spill response, and dispersant use in particular. This study assesses the effects and efficacy of dispersants as an oil spill response tool and evaluates trade-offs associated with dispersant use.

Produced Water

Produced Water
Author: James P. Ray
Publisher: Springer Science & Business Media
Total Pages: 606
Release: 2012-12-06
Genre: Science
ISBN: 1461529026

This book represents the proceedings of the first major international meeting dedi cated to discuss environmental aspects of produced water. The 1992 International Pro duced Water Symposium was held at the Catamaran Hotel, San Diego, California, USA, on February 4-7, 1992. The objectives of the conference were to provide a forum where scientists, regulators, industry, academia, and the enviromental community could gather to hear and discuss the latest information related to the environmental considerations of produced water discharges. It was also an objective to provide a forum for the peer review and international publication of the symposium papers so that they would have wide availability to all parties interested in produced water environmental issues. Produced water is the largest volume waste stream from oil and gas production activities. Onshore, well over 90% is reinjected to subsurface formations. Offshore, and in the coastal zone, most produced water is discharged to the ocean. Over the past several years there has been increasing concern from regulators and the environmental commu nity. There has been a quest for more information on the composition, treatment systems and chemicals, discharge characteristics, disposal options, and fate and effects of the produced water. As so often happens, much of this information exists in the forms of reports and internal research papers. This symposium and publication was intended to make this information available, both for open discussion at the conference, and for peer review before publication.

Guidelines for Engineering Design for Process Safety

Guidelines for Engineering Design for Process Safety
Author: CCPS (Center for Chemical Process Safety)
Publisher: John Wiley & Sons
Total Pages: 607
Release: 2010-10-12
Genre: Technology & Engineering
ISBN: 0470938269

Inherently safer plants begin with the initial design. Here is where integrity and reliability can be built in at the lowest cost, and with maximum effectiveness. This book focuses on process safety issues in the design of chemical, petrochemical, and hydrocarbon processing facilities. It discusses how to select designs that can prevent or mitigate the release of flammable or toxic materials, which could lead to a fire, explosion, or environmental damage. All engineers on the design team, the process hazard analysis team, and those who make basic decisions on plant design, will benefit from its comprehensive coverage, its organization, and the extensive references to literature, codes, and standards that accompany each chapter.

Process Safety for Engineers

Process Safety for Engineers
Author: CCPS (Center for Chemical Process Safety)
Publisher: John Wiley & Sons
Total Pages: 564
Release: 2022-05-03
Genre: Science
ISBN: 1119830982

Process Safety for Engineers Familiarizes an engineer new to process safety with the concept of process safety management In this significantly revised second edition of Process Safety for Engineers: An Introduction, CCPS delivers a comprehensive book showing how Process Safety concepts are used to reduce operational risks. Students, new engineers, and others new to process safety will benefit from this book. In this updated edition, each chapter begins with a detailed incident case study, provides steps that help address issues, and contains problem sets which can be assigned to students. The second edition covers: Process Safety: including an overview of CCPS’ Risk Based Process Safety Hazards: specifically fire and explosion, reactive chemical, and toxicity Design considerations for hazard control: including Hazard Identification and Risk Analysis Management of operational risk: including management of change In addition, the book presents how Process Safety performance is monitored and sustained. The associated online resources are linked to the latest online CCPS resources and lectures.

Process Systems Risk Management

Process Systems Risk Management
Author: Ian T. Cameron
Publisher: Elsevier
Total Pages: 631
Release: 2005-06-14
Genre: Technology & Engineering
ISBN: 0080455107

Process Systems Risk Management provides complete coverage of risk management concepts and applications for safe design and operation of industrial and other process facilities. The whole life cycle of the process or product is taken into account, from its conception to decommissioning. The breadth of human factors in risk management is also treated, ranging from personnel and public safety to environmental impact and business interruption. This unique approach to process risk management is firmly grounded in systems engineering. Numerous examples are used to illustrate important concepts –drawn from almost 40 years authors' experience in risk analysis, assessment and management, with applications in both on- and off-shore operations. This book is essential reading on the relevant techniques to tackle risk management activities for small-, medium- and large-scale operations in the process industries. It is aimed at informing a wide audience of industrial risk management practitioners, including plant managers, engineers, health professionals, town planners, and administrators of regulatory agencies. - A computational perspective on the risk management of chemical processes - A multifaceted approach that includes the technical, social, human and management factors - Includes numerous examples and illustrations from real life incidents