Developing Production Pile Driving Criteria from Test Pile Data

Developing Production Pile Driving Criteria from Test Pile Data
Author: Dan A. Brown
Publisher: Transportation Research Board
Total Pages: 518
Release: 2011
Genre: Technology & Engineering
ISBN: 0309143357

TRB’s National Cooperative Highway Research Program (NCHRP) Synthesis 418: Developing Production Pile Driving Criteria from Test Pile Data provides information on the current practices used by state transportation agencies to develop pile driving criteria, with special attention paid to the use of test pile data in the process.

Frontiers in Offshore Geotechnics III

Frontiers in Offshore Geotechnics III
Author: Vaughan Meyer
Publisher: CRC Press
Total Pages: 1422
Release: 2015-05-15
Genre: Technology & Engineering
ISBN: 131567551X

Frontiers in Offshore Geotechnics III comprises the contributions presented at the Third International Symposium on Frontiers in Offshore Geotechnics (ISFOG, Oslo, Norway, 10-12 June 2015), organised by the Norwegian Geotechnical Institute (NGI). The papers address current and emerging geotechnical engineering challenges facing those working in off

Piling Engineering

Piling Engineering
Author: Ken Fleming
Publisher: CRC Press
Total Pages: 400
Release: 1994-03-17
Genre: Technology & Engineering
ISBN: 9780751401943

Piling is a fast-moving field and in recent years there have been major advances in theory, methods, testing procedures and equipment. Some of these changes have been driven by the need for economies by improved efficiency, reduced spoil production and new methods of pile bore support. Advances in theoretical analyses allow pile design to be refined so that piles and pile groups perform to better advantage.

Pile Driving Analysis for Pile Design and Quality Assurance

Pile Driving Analysis for Pile Design and Quality Assurance
Author: Rodrigo Salgado
Publisher:
Total Pages:
Release: 2018-02
Genre:
ISBN: 9781622604791

Driven piles are commonly used in foundation engineering. The most accurate measurement of pile capacity is achieved from measurements made during static load tests. Static load tests, however, may be too expensive for certain projects. In these cases, indirect estimates of the pile capacity can be made through dynamic measurements. These estimates can be performed either through pile driving formulae or through analytical methods, such as the Case method.Pile driving formulae, which relate the pile set per blow to the capacity of the pile, are frequently used to determine whether the pile has achieved its design capacity. However, existing formulae have numerous shortcomings. These formulae are based on empirical observations and lack scientific validation. This report details the development of more accurate and reliable pile driving formulae developed from advanced one-dimensional FE simulations. These formulae are derived for piles installed in five typical soil profiles: a floating pile in sand, an end¿bearing pile in sand, a floating pile in clay, an end¿bearing pile in clay and a pile crossing a normally consolidated clay layer and resting on a dense sand layer. The proposed driving formulae are validated through well-documented case histories of full-scale instrumented driven piles. The proposed formulae are more accurate and reliable on average than other existing methods for the case histories considered in this study.This report also discusses the development of a pile driving control system, a fully integrated system developed by Purdue that can be used to collect, process, and analyze data to estimate the capacities of piles using the Case method and the pile driving formulae developed at Purdue.

Challenges and Innovations in Geotechnics

Challenges and Innovations in Geotechnics
Author: Askar Zhussupbekov
Publisher: CRC Press
Total Pages: 327
Release: 2016-12-01
Genre: Nature
ISBN: 1498799744

Challenges and Innovations in Geotechnics is a collections of papers presented at the Eighth Asian Young Geotechnical Engineering Conference (8AYGEC, Astana, Kazakhstan, 5-7 August 2016), and covers various aspects the areas of soil mechanics and geotechnical engineering. The book contains special and keynote lectures and contributions on a wide range of topics in geotechnical engineering and construction: (1) Laboratory and Field Testing (2) Foundation and Underground Structure (3) Ground Improvement (4) Earthquake and Environment (5) Numerical and Analytical Modeling (6) Advanced Soil Mechanics (7) Historical Sites Challenges and Innovations in Geotechnics was published under the auspices of the ISSMGE TC-305 ‘Geotechnical Infrastructures for Megacities and New Capitals’, and reflects the present and future state of geotechnical engineering. The book will be extremely useful to geoengineers and researchers in the abovementioned areas.

Application of Stress-Wave Theory to Piles: Quality Assurance on Land and Offshore Piling

Application of Stress-Wave Theory to Piles: Quality Assurance on Land and Offshore Piling
Author: J. Beim
Publisher: CRC Press
Total Pages: 791
Release: 2000-01-01
Genre: Technology & Engineering
ISBN: 1482283751

This work collates the topics discussed in the sixth International Conference on land and offshore piling. It covers topics such as: wave mechanics and its application to pile mechanics; driving equipment and developments; and pile integrity and low strain dynamic testing.

Pile Foundations in Engineering Practice

Pile Foundations in Engineering Practice
Author: Shamsher Prakash
Publisher: John Wiley & Sons
Total Pages: 768
Release: 1991-01-16
Genre: Technology & Engineering
ISBN: 9780471616535

This is a concise, systematic and complete treatment of the design and construction of pile foundations. Discusses pile behavior under various loadings and types of piles and their installation, including consideration of soil parameters. It provides step-by-step design procedures for piles subject to vertical loading and pullout, lateral, inclined and eccentric loads, or dynamic loads, and for piles in permafrost. Also describes load test procedures and their interpretation and buckling of long, slender piles with and without supported length. The closing chapter presents case histories of prediction and performance of piles and pile groups. Includes numerous solved problems.

The Foundation Engineering Handbook, Second Edition

The Foundation Engineering Handbook, Second Edition
Author: Manjriker Gunaratne
Publisher: CRC Press
Total Pages: 730
Release: 2013-11-26
Genre: Technology & Engineering
ISBN: 1439892776

Considering how structures interact with soil, and building proper foundations, is vital to ensuring public safety and to the longevity of buildings. Understanding the strength and compressibility of subsurface soil is essential to the foundation engineer. The Foundation Engineering Handbook, Second Edition provides the fundamentals of foundation engineering needed by professional engineers and engineering students. It presents both classical and state-of-the-art design and analysis techniques for earthen structures and examines the principles and design methods of foundation engineering needed for design of building foundations, embankments, and earth retaining structures. It covers basic soil mechanics, and soil and groundwater modeling concepts, along with the latest research results. What’s New in the Second Edition: Adds alternative analytical techniques to nearly every chapter Supplements existing material with new content Includes additional applications in the state of the art such as unsaturated soil mechanics, analysis of transient flow through soils, deep foundation construction monitoring based on thermal integrity profiling, and updated ground remediation techniques Covers reliability-based design and LRFD (load resistance factor design) concepts not addressed in most foundation engineering texts Provides more than 500 illustrations and over 1,300 equations The text serves as an ideal resource for practicing foundation and geotechnical engineers, as well as a supplemental textbook for both undergraduate and graduate levels.

Artificial Neural Networks

Artificial Neural Networks
Author: Chi Leung Patrick Hui
Publisher: BoD – Books on Demand
Total Pages: 602
Release: 2011-04-11
Genre: Computers
ISBN: 9533071885

This book covers 27 articles in the applications of artificial neural networks (ANN) in various disciplines which includes business, chemical technology, computing, engineering, environmental science, science and nanotechnology. They modeled the ANN with verification in different areas. They demonstrated that the ANN is very useful model and the ANN could be applied in problem solving and machine learning. This book is suitable for all professionals and scientists in understanding how ANN is applied in various areas.