A Revolution in Manufacturing

A Revolution in Manufacturing
Author: Andrew P. Dillon
Publisher: CRC Press
Total Pages: 394
Release: 1985-04-01
Genre: Business & Economics
ISBN: 9780915299034

Written by the industrial engineer who developed SMED (single-minute exchange of die) for Toyota, A Revolution in Manufacturing provides a full overview of this powerful just in time production tool. It offers the most complete and detailed instructions available anywhere for transforming a manufacturing environment in ways that will speed up production and make small lot inventories feasible. The author delves into both the theory and practice of the SMED system, explaining fundamentals as well as techniques for applying SMED. The critically acclaimed text is supported with hundreds of illustrations and photographs, as well as twelve chapter-length case studies.

Manufacturing Revolution

Manufacturing Revolution
Author: Lawrence A. Peskin
Publisher: JHU Press
Total Pages: 308
Release: 2007-11
Genre: Business & Economics
ISBN: 9780801887505

"While much has been written about the industrial revolution," writes Lawrence Peskin, "we rarely read about industrial revolutionaries." This absence, he explains, reflects the preoccupation of both classical and Marxist economics with impersonal forces rather than with individuals. In Manufacturing Revolution Peskin deviates from both dominant paradigms by closely examining the words and deeds of individual Americans who made things in their own shops, who met in small groups to promote industrialization, and who, on the local level, strove for economic independence. In speeches, petitions, books, newspaper articles, club meetings, and coffee–house conversations, they fervently discussed the need for large-scale American manufacturing a half-century before the Boston Associates built their first factory. Peskin shows how these economic pioneers launched a discourse that continued for decades, linking industrialization to the cause of independence and guiding the new nation along the path of economic ambition. Based upon extensive research in both manuscript and printed sources from the period between 1760 and 1830, this book will be of interest to historians of the early republic and economic historians as well as to students of technology, business, and industry.

Industry 4.0

Industry 4.0
Author: Colin Koh
Publisher: Independently Published
Total Pages: 347
Release: 2019-12-12
Genre:
ISBN: 9781710521368

This book will serve as an Industry 4.0 reference, guide, and engaging story for all those interested in the ASEAN regions promising manufacturing sectors. A gold mine of information for industrial engineers and business practitioners in ASEAN, as well as those with business and investment interests in the region. From students to national strategists, Industry 4.0: Navigating the Manufacturing Revolution in ASEAN is an essential guide to digital transformation. Industry 4.0 offers almost limitless opportunities but also serious challenges, for the various stakeholders in each of the diverse ASEAN markets. This book disseminates the fourth industrial revolution, explores the vast scope of Industry 4.0, and brings together two of the region's leading experts to guide readers through best practice and help them achieve their professional goals.

The Fourth Industrial Revolution

The Fourth Industrial Revolution
Author: Klaus Schwab
Publisher: Crown Currency
Total Pages: 194
Release: 2017-01-03
Genre: Business & Economics
ISBN: 1524758876

World-renowned economist Klaus Schwab, Founder and Executive Chairman of the World Economic Forum, explains that we have an opportunity to shape the fourth industrial revolu­tion, which will fundamentally alter how we live and work. Schwab argues that this revolution is different in scale, scope and complexity from any that have come before. Characterized by a range of new technologies that are fusing the physical, digital and biological worlds, the developments are affecting all disciplines, economies, industries and governments, and even challenging ideas about what it means to be human. Artificial intelligence is already all around us, from supercomputers, drones and virtual assistants to 3D printing, DNA sequencing, smart thermostats, wear­able sensors and microchips smaller than a grain of sand. But this is just the beginning: nanomaterials 200 times stronger than steel and a million times thinner than a strand of hair and the first transplant of a 3D printed liver are already in development. Imagine “smart factories” in which global systems of manu­facturing are coordinated virtually, or implantable mobile phones made of biosynthetic materials. The fourth industrial revolution, says Schwab, is more significant, and its ramifications more profound, than in any prior period of human history. He outlines the key technologies driving this revolution and discusses the major impacts expected on government, business, civil society and individu­als. Schwab also offers bold ideas on how to harness these changes and shape a better future—one in which technology empowers people rather than replaces them; progress serves society rather than disrupts it; and in which innovators respect moral and ethical boundaries rather than cross them. We all have the opportunity to contribute to developing new frame­works that advance progress.

Makers

Makers
Author: Chris Anderson
Publisher: Crown Currency
Total Pages: 252
Release: 2012-10-02
Genre: Technology & Engineering
ISBN: 0307720977

3D Robotics co-founder and bestselling author Chris Anderson takes you to the front lines of a new industrial revolution as today’s entrepreneurs, using open source design and 3-D printing, bring manufacturing to the desktop. In an age of custom-fabricated, do-it-yourself product design and creation, the collective potential of a million garage tinkerers and enthusiasts is about to be unleashed, driving a resurgence of American manufacturing. A generation of “Makers” using the Web’s innovation model will help drive the next big wave in the global economy, as the new technologies of digital design and rapid prototyping gives everyone the power to invent--creating “the long tail of things”.

Manufacturing Independence

Manufacturing Independence
Author: Robert F. Smith (Military historian)
Publisher: Westholme Publishing
Total Pages: 0
Release: 2016
Genre: Industrial revolution
ISBN: 9781594162473

The Untold Story of the Industrial Revolution and the American Victory in the War for Independence Benjamin Franklin was serious when he suggested the colonists arm themselves with the longbow. The American colonies were not logistically prepared for the revolution and this became painfully obvious in war's first years. Trade networks were destroyed, inflation undermined the economy, and American artisans could not produce or repair enough weapons to keep the Continental Army in the field. The Continental Congress responded to this crisis by mobilizing the nation's manufacturing sector for war. With information obtained from Europe through both commercial exchange and French military networks, Congress became familiar with the latest manufacturing techniques and processes of the nascent European industrial revolution. They therefore initiated an innovative program of munitions manufacturing under the Department of the Commissary General of Military Stores. The department gathered craftsmen and workers into three national arsenals where they were trained for the large-scale production of weapons. The department also engaged private manufacturers, providing them with materials and worker training, and instituting a program of inspecting their finished products. As historian Robert F. Smith relates in Manufacturing Independence: Industrial Innovation in the American Revolution, the colonies were able to provide their military with the arms it needed to fight, survive, and outlast the enemy--supplying weapons for the victory at Saratoga, rearming their armies in the South on three different occasions, and providing munitions to sustain the siege at Yorktown. But this manufacturing system not only successfully supported the Continental Army, it also demonstrated new production ideas to the nation. Through this system, the government went on to promote domestic manufacturing after the war, becoming a model for how the nation could produce goods for its own needs. The War for Independence was not just a political revolution, it was an integral part of the Industrial Revolution in America.

Additive Manufacturing

Additive Manufacturing
Author: M. Manjaiah
Publisher: Woodhead Publishing
Total Pages: 325
Release: 2021-07-17
Genre: Technology & Engineering
ISBN: 0128220570

Additive Manufacturing: A Tool for Industrial Revolution 4.0 explores the latest developments, underlying mechanisms, challenges and opportunities for 3D printing in a digital manufacturing environment. It uses an international panel of experts to explain how additive manufacturing processes have been successfully integrated with industry 4.0 technologies for increased technical capabilities, efficiency, flexibility and sustainability. The full manufacturing product cycle is addressed, including design, materials, mechanical properties, and measurement. Future directions for this important technological intersection are also explored. This book will interest researchers and industrial professionals in industrial engineering, digital manufacturing, advanced manufacturing, data science applications, and computer engineering. - Addresses a wide range of additive manufacturing technology, including processes, controls and operation - Explains many new and sustainable additive manufacturing methods - Provides detailed descriptions on how to modernize and optimize conventional additive manufacturing methodologies in order to take full advantage of synergies with industry 4.0

Rapid Manufacturing

Rapid Manufacturing
Author: Neil Hopkinson
Publisher: John Wiley & Sons
Total Pages: 304
Release: 2006-02-22
Genre: Technology & Engineering
ISBN: 9780470032862

Rapid Manufacturing is a new area of manufacturing developed from a family of technologies known as Rapid Prototyping. These processes have already had the effect of both improving products and reducing their development time; this in turn resulted in the development of the technology of Rapid Tooling, which implemented Rapid Prototyping techniques to improve its own processes. Rapid Manufacturing has developed as the next stage, in which the need for tooling is eliminated. It has been shown that it is economically feasible to use existing commercial Rapid Prototyping systems to manufacture series parts in quantities of up to 20,000 and customised parts in quantities of hundreds of thousands. This form of manufacturing can be incredibly cost-effective and the process is far more flexible than conventional manufacturing. Rapid Manufacturing: An Industrial Revolution for the Digital Age addresses the academic fundamentals of Rapid Manufacturing as well as focussing on case studies and applications across a wide range of industry sectors. As a technology that allows manufacturers to create products without tools, it enables previously impossible geometries to be made. This book is abundant with images depicting the fantastic array of products that are now being commercially manufactured using these technologies. Includes contributions from leading researchers working at the forefront of industry. Features detailed illustrations throughout. Rapid Manufacturing: An Industrial Revolution for the Digital Age is a groundbreaking text that provides excellent coverage of this fast emerging industry. It will interest manufacturing industry practitioners in research and development, product design and materials science, as well as having a theoretical appeal to researchers and post-graduate students in manufacturing engineering, product design, CAD/CAM and CIFM.

Britain's Industrial Revolution

Britain's Industrial Revolution
Author: Barrie Stuart Trinder
Publisher:
Total Pages: 0
Release: 2013
Genre: Great Britain
ISBN: 9781859361757

This important new book endeavors to explain the industrial revolution throughout the British Isles.

The Pan-Industrial Revolution

The Pan-Industrial Revolution
Author: Richard D'Aveni
Publisher: Houghton Mifflin Harcourt
Total Pages: 325
Release: 2018-10-16
Genre: Business & Economics
ISBN: 1328955915

The acclaimed author of Strategic Capitalism presents a provocative new vision of global industry in the age of 3-D printing: “essential business reading” (Kirkus, starred review). With books like Hypercompetition and Strategic Capitalism, Richard D’Aveni has established himself as a business strategist of uncanny prescience. In The Pan-Industrial Revolution, he demonstrates how the advent of industrial‑scale 3‑D printing is already happening under the radar, and that it will have a far‑reaching impact that most corporate and governmental leaders have yet to anticipate or understand. 3-D printing, now called additive manufacturing, has moved far beyond a desktop technology used by hobbyists to churn out trinkets and toys. In this eye-opening account, D’Aveni reveals how recent breakthroughs have been secretly adapted by Fortune 500 companies to revolutionize the manufacture jet engines, airplanes, automobiles, and so much more. D’Aveni explains how this technology will transform the landscape of manufacturing, and the dramatic effect this change will have on the world economy. A handful of massively powerful corporations—what D’Aveni calls pan‑industrials—will become as important as any tech giant in re-structuring the global order.