A Bulk Semiconductor Millimeter Wave Phase Shifter

A Bulk Semiconductor Millimeter Wave Phase Shifter
Author: M. M. Chrepta
Publisher:
Total Pages: 19
Release: 1971
Genre:
ISBN:

In this report an analysis of the parameters of a dielectric semiconductor waveguide is given, and the analysis and design of a bulk semiconductor phase shifter is presented. Calculations and experiments have been carried out at frequencies in the Ku-Band. These concepts are applicable not only at this wavelength but even more so in the millimeter and submillimeter regions of the spectrum. The mechanism of the phase shift device is discussed and analyzed with a technique similar to that used in integrated optics. (Author).

Microwave and Millimeter Wave Phase Shifters: Semiconductor and delay line phase sifters

Microwave and Millimeter Wave Phase Shifters: Semiconductor and delay line phase sifters
Author: Shiban K. Koul
Publisher: Artech House on Demand
Total Pages: 664
Release: 1991
Genre: Science
ISBN: 9780890065853

This second volume of Microwave and Millimeter Wave Phase Shifters concentrates on semiconductor and delay-line phase shifters. It explains why various types of phase shifters hold potential for future phased arrays. Systematically organized and with practical design examples, the text enumerates broad criteria for the selection of all types of phase shifters for the reader's systems applications.

Bulk Semiconductor Quasi-Optical Concept for Guided Waves for Advanced Millimeter Wave Devices

Bulk Semiconductor Quasi-Optical Concept for Guided Waves for Advanced Millimeter Wave Devices
Author: Metro M. Chrepta
Publisher:
Total Pages: 42
Release: 1971
Genre:
ISBN:

Recent suggestions have been made for the design of bulk semiconductor millimeter wave devices, and in particular, a new type of phase shifter. In order for these designs to perform in a satisfactory manner it was found necessary to demonstrate that that electromagnetic propagation would occur largely in the interior of a semiconductor dielectric waveguide with relatively low loss. In this report an analysis is made of electromagnetic waves guided in an infinite slab of material with the properties of high resistivity silicon. Calculations and preliminary experiments are demonstrated at frequencies near 16.0 GHz. It is concluded that propagation in the semiconductor medium offers the possibility of low loss circuitry and satisfies the requisites for device design.

Infrared and Millimeter Waves V14

Infrared and Millimeter Waves V14
Author: Kenneth J. Button
Publisher: Elsevier
Total Pages: 429
Release: 1985-11-28
Genre: Technology & Engineering
ISBN: 0323150616

Infrared and Millimeter Waves, Volume 14: Millimeter Components and Techniques, Part V is concerned with millimeter-wave guided propagation and integrated circuits. In addition to millimeter-wave planar integrated circuits and subsystems, this book covers transducer configurations and integrated-circuit techniques, antenna arrays, optoelectronic devices, and tunable gyrotrons. Millimeter-wave gallium arsenide (GaAs) IMPATT diodes are also discussed. This monograph is comprised of six chapters and begins with a description of millimeter-wave integrated-circuit transducers, focusing on various designs and trade-offs and providing hardware examples. The next chapter deals with millimeter-wave planar integrated circuits based on three transmission media: microstrip lines, suspended strip lines, and fin lines. Various transmission media and substrates are first considered, followed by design considerations and performances of several integrated-circuit components, including mixers, IMPATT oscillators, frequency multipliers, switches, filters, couplers, and ferrite devices. A few selected subsystems are also discussed. The following chapters look at planar millimeter-wave antenna arrays; optoelectronic devices for millimeter waves; and the state of the art in GaAs IMPATT diode technology for both cw and pulsed modes of operation. The final chapter is devoted to the gyrotron or electron cyclotron resonance maser. This text will be a useful resource for physicists and electronics and electrical engineers.

Bulk Semiconductor Dielectric Waveguide Functional Circuits

Bulk Semiconductor Dielectric Waveguide Functional Circuits
Author: M. M. Chrepta
Publisher:
Total Pages: 34
Release: 1973
Genre:
ISBN:

UCTOR COMPATIBLE WITH ACTIVE DEVICES, IT IS PROPOSED THAT ACTIVE DEVICES CAN BE CONSTRUCTED DIRECTLY IN THE SEMICONDUCTOR DIELECTRIC GUIDE OR APPENDAGED DIRECTLY ON THE SURFACE. The basic approach is similar to that used in integrated optics, except that the medium for millimeter wave guidance is a semiconductor and the control devices rely on conductivity modulation rather than on electro-optical effects. Some particular devices suggested are oscillators, mechanical and electronic phase shifters, amplitude modulators (switches), and detectors. The first of such devices investigated has been the electronic phase shifter. Related theory and experiments are reported here. In addition, preliminary results on oscillators imbedded in a dielectric resonator are presented. (Author).

RCA Review

RCA Review
Author:
Publisher:
Total Pages: 834
Release: 1981
Genre: Electronics
ISBN:

Picosecond Electronics and Optoelectronics

Picosecond Electronics and Optoelectronics
Author: Gerard A. Mourou
Publisher: Springer Science & Business Media
Total Pages: 267
Release: 2013-03-07
Genre: Technology & Engineering
ISBN: 3642707807

Over the past decade, we have witnessed a number of spectacular advances in the fabrication of crystalline semiconductor devices due mainly to the pro gress of the different techni ques of heteroepitaxy. The di scovery of two dimensional behavior of electrons led to the development of a new breed of ultrafast electronic and optical devices, such as modulation doped FETs, permeable base transistors, and double heterojunction transistors. Comparable progress has been made in the domain of cryoelectronics, ultrashort pulse generation, and ultrafast diagnostics. Dye lasers can generate 8 fs signals after compression, diode lasers can be modulated at speeds close to 20 GHz and electrical signals are characterized with subpicosecond accuracy via the electro-optic effect. Presently, we are experiencing an important interplay between the field of optics and electronics; the purpose of this meeting was to foster and enhance the interaction between the two disciplines. It was logical to start the conference by presenting to the two different audiences, i. e. , electronics and optics, the state-of-the-art in the two res pective fields and to highlight the importance of optical techniques in the analysis of physical processes and device performances. One of the leading techniques in this area is the electro-optic sampling technique. This optical technique has been used to characterize transmission lines and GaAs devices. Carrier transport in semiconductors is of fundamental importance and some of its important aspects are stressed in these proceedings.