Design of Very High-Frequency Multirate Switched-Capacitor Circuits

Design of Very High-Frequency Multirate Switched-Capacitor Circuits
Author: Seng-Pan U
Publisher: Springer Science & Business Media
Total Pages: 268
Release: 2006
Genre: Computers
ISBN: 9780387261218

Design of Very High-Frequency Multirate Switched-Capacitor Circuits presents the theory and the corresponding CMOS implementation of the novel multirate sampled-data analog interpolation technique which has its great potential on very high-frequency analog frond-end filtering due to its inherent dual advantage of reducing the speed of data-converters and DSP core together with the specification relaxation of the post continuous-time filtering. This technique completely eliminates the traditional phenomenon of sampled-and-hold frequency-shaping at the lower input sampling rate. Also, in order to tackle physical IC imperfections at very high frequency, the state-of-the-art circuit design and layout techniques for high-speed Switched-Capacitor (SC) circuits are comprehensively discussed: -Optimum circuit architecture tradeoff analysis -Simple speed and power trade-off analysis of active elements -High-order filtering response accuracy with respect to capacitor-ratio mismatches -Time-interleaved effect with respect to gain and offset mismatch -Time-interleaved effect with respect to timing-skew and random jitter with non-uniformly holding -Stage noise analysis and allocation scheme -Substrate and supply noise reduction -Gain-and offset-compensation techniques -High-bandwidth low-power amplifier design and layout -Very low timing-skew multiphase generation Two tailor-made optimum design examples in CMOS are presented. The first one achieves a 3-stage 8-fold SC interpolating filter with 5.5MHz bandwidth and 108MHz output sampling rate for a NTSC/PAL CCIR 601 digital video at 3 V. Another is a 15-tap 57MHz SC FIR bandpass interpolating filter with 4-fold sampling rate increase to 320MHz and the first-time embedded frequency band up-translation for DDFS system at 2.5V. The corresponding chip prototype achieves so far the highest operating frequency, highest filter order and highest center frequency with highest dynamic range under the lowest supply voltage when compared to the previously reported high-frequency SC filters in CMOS.

Low Power and Low Voltage Circuit Design with the FGMOS Transistor

Low Power and Low Voltage Circuit Design with the FGMOS Transistor
Author: Esther Rodriguez-Villegas
Publisher: IET
Total Pages: 320
Release: 2006-10-02
Genre: Technology & Engineering
ISBN: 0863416179

Motivated by consumer demand for smaller, more portable electronic devices that offer more features and operate for longer on their existing battery packs, cutting edge electronic circuits need to be ever more power efficient. For the circuit designer, this requires an understanding of the latest low voltage and low power (LV/LP) techniques, one of the most promising of which makes use of the floating gate MOS (FGMOS) transistor.

Completion Detection in Asynchronous Circuits

Completion Detection in Asynchronous Circuits
Author: Pallavi Srivastava
Publisher: Springer Nature
Total Pages: 129
Release: 2022-11-08
Genre: Technology & Engineering
ISBN: 3031183975

This book is intended for designers with experience in traditional (clocked) circuit design, seeking information about asynchronous circuit design, in order to determine if it would be advantageous to adopt asynchronous methodologies in their next design project. The author introduces a generic approach for implementing a deterministic completion detection scheme for asynchronous bundled data circuits that incorporates a data-dependent computational process, taking advantage of the average-case delay. The author validates the architecture using a barrel shifter, as shifting is the basic operation required by all the processors. The generic architecture proposed in this book for a deterministic completion detection scheme for bundled data circuits will facilitate researchers in considering the asynchronous design style for developing digital circuits.

Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology

Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology
Author: Luciano Lavagno
Publisher: CRC Press
Total Pages: 893
Release: 2017-02-03
Genre: Technology & Engineering
ISBN: 1351831003

The second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology thoroughly examines real-time logic (RTL) to GDSII (a file format used to transfer data of semiconductor physical layout) design flow, analog/mixed signal design, physical verification, and technology computer-aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on 3D circuit integration and clock design Offering improved depth and modernity, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.

Sensors, Mechanical Sensors

Sensors, Mechanical Sensors
Author: Wolfgang Göpel
Publisher: John Wiley & Sons
Total Pages: 692
Release: 2008-11-20
Genre: Technology & Engineering
ISBN: 3527620729

'Sensors' is the first self-contained series to deal with the wholearea of sensors. It describes general aspects, technical andphysical fundamentals, construction, function, applications anddevelopments of the various types of sensors. This volume contains the physical and technical fundamentals ofmechanical sensors, and contains and assesses the various types ofsensors for particular applications. Of interest to engineers,physicists, chemists and others involved in sensor technology.